Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Handling

    2001 Haro Vector V1 has a 0.5° slacker head-tube angle than 1999 Haro Vector V1 in the archived geometry. Frame size is not identified for 2001 Haro Vector V1 and 1999 Haro Vector V1.

    Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.

  2. Gearing

    2001 Haro Vector V1 has a 21% lower climbing ratio than 1999 Haro Vector V1.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

2001 Haro Vector V1Size Legacy reference · 42/32/22T · 14–34T · 7-speed
Lowest0.65:1Highest3.00:1Total range464%
Estimated speed at 90 RPMLowest gear4.5 mphHighest gear20.8 mph

Uses front tire 26×1.95; rear size isn’t listed.

1999 Haro Vector V1Size Legacy reference · 48/38/28T · 11–34T · 7-speed
Lowest0.82:1Highest4.36:1Total range530%
Estimated speed at 90 RPMLowest gear5.7 mphHighest gear30.3 mph

Uses front tire 26×1.95; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
2001 Haro Vector V1
1999 Haro Vector V1
Overview
Model Year
2001
1999
Brand
Haro
Haro
Model
Vector V1
Vector V1
Bicycle Type
Mountain bike, front suspension
Mountain bike, front suspension
Original MSRP
$250.00
$270.00
Colors
Black, Green, Blue
Anodized Blue, Mango
Sizes
13.5", 15.5", 17.5", 19.5", 21.5"
13.5", 15.5", 17.5", 19.5", 21.5"
Weight
31.5 lb
31.5 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Chromoly seat tube/hi-tensile steel
7005 aluminum
Fork
Mozo ML30, 2.4" travel
SR Suntour M-6100, 2.5" travel
Fork Material
Aluminum/chromoly, triple-clamp crown
Aluminum/chromoly, triple-clamp crown
Drivetrain
Component Group
Shimano Tourney TY-40
Mountain Mix
Shifters
Shimano Revo
Shimano Alivio EZ Fire Plus
Front Derailleur
Shimano TY10, bottom-pull/clamp-on 31.8mm
Shimano Tourney TY-32, bottom-pull/clamp-on 31.8mm
Rear Derailleur
Shimano MR-40
Shimano MR-40
Crankset
Shimano C-101, 22/32/42 teeth
SR XR11, 28/38/48 teeth
Bottom Bracket
Tien Hsin, 110.5mm spindle
Tien Hsin, 118mm spindle
BB Shell Width
68mm English
68mm English
Rear Cogs
7-speed, 14 - 34 teeth
7-speed, 11 - 34 teeth
Chain
KMC Z-51, 1/2 x 3/32"
KMC HG-50, 1/2 x 3/32"
Pedals
Resin
Resin
Brakes
Brakes
Aluminum linear-pull brakes, aluminum linear-pull levers
Chang Star linear-pull brakes, Shimano AceraX levers
Cockpit & Contact Points
Headset
1" Tien Hsin
1 1/8" threadless YST CS558
Handlebar
Steel, rise
Steel, rise
Handlebar Extensions
Not included
Not included
Stem
Hsin Lung steel
Hsin Lung steel
Saddle
Haro Selle Comfort
Haro Selle Comfort
Seatpost
Aluminum, 29.2mm diameter
Haro micro-adjust, 26.2mm diameter
Wheels & Tires
Hubs
Aluminum, Q/R
Joy Tech aluminum, nutted
Rims
Weinmann 519, 36-hole
Haro RC3, 36-hole
Spokes
Stainless steel, 2.0mm straight gauge
Stainless steel, 2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 1.95" Kenda Konquest
26 x 1.95" Kenda Kwick
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
71°
71.5°
Seat-tube angle
73°
73°
Chainstay / rear center
426.7 mm
425.4 mm
Wheelbase
1051.6 mm
1051.6 mm
Fork offset / rake
—
38.1 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Sponsored affiliate link
Scroll to Top