Uses front tire 26×1.95; rear size isn’t listed.
Velopedia Bicycle Archive
1999 Haro Vector V1
Original specifications: Mountain Mix drivetrain · 26" wheels · 31.5 lb published weight.
Planning to sell? Draft your listing
At a glance
Archive #86130- Model year
- 1999
- Category
- Mountain
- Original MSRP
- $270.00
- Sizes
- 13.5", 15.5", 17.5", 19.5", 21.5"
- Colors
- Anodized Blue, Mango
- Weight
- 31.5 lb
- Geometry
- Legacy reference
- In this record
- 27 specifications · archived image · original MSRP · geometry
Model history 4 other years
Browse other years
Compare side by side
Identification clues
1999 archived details
- Published colors
- Anodized Blue, Mango
- Frame
- 7005 aluminum
- Original equipment
- Mountain Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build7005 aluminum · Mountain Mix · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 7005 aluminum |
| Fork | SR Suntour M-6100, 2.5" travel |
| Fork Material | Aluminum/chromoly, triple-clamp crown |
Drivetrain
| Component Group | Mountain Mix |
|---|---|
| Shifters | Shimano Alivio EZ Fire Plus |
| Front Derailleur | Shimano Tourney TY-32, bottom-pull/clamp-on 31.8mm |
| Rear Derailleur | Shimano MR-40 |
| Crankset | SR XR11, 28/38/48 teeth |
| Bottom Bracket | Tien Hsin, 118mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 7-speed, 11 - 34 teeth |
| Chain | KMC HG-50, 1/2 x 3/32" |
| Pedals | Resin |
Brakes
| Brakes | Chang Star linear-pull brakes, Shimano AceraX levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless YST CS558 |
|---|---|
| Handlebar | Steel, rise |
| Handlebar Extensions | Not included |
| Stem | Hsin Lung steel |
| Saddle | Haro Selle Comfort |
| Seatpost | Haro micro-adjust, 26.2mm diameter |
Wheels & Tires
| Hubs | Joy Tech aluminum, nutted |
|---|---|
| Rims | Haro RC3, 36-hole |
| Spokes | Stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 26 x 1.95" Kenda Kwick |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 565.1 mm |
| Head-tube angle | 71.5° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 425.4 mm |
| Wheelbase | 1051.6 mm |
| Fork offset / rake | 38.1 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
1/2 x 3/32"
Shimano AceraX levers
More parts (2)Fewer parts
26.2mm diameter
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 1.95" Kenda Kwick
- Drivetrain
- 7-speed
- Seatpost diameter
- 26.2 mm
- Bottom bracket / shell
- Tien Hsin, 118mm spindle · 68mm English
Equipment inspection checks 11 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: SR Suntour M-6100, 2.5" travel · Aluminum/chromoly, triple-clamp crown
Suspension
Evaluate the suspension →Archived: Fork: SR Suntour M-6100, 2.5" travel
Drivetrain
Check drivetrain wear →Archived: Group: Mountain Mix · Shifters: Shimano Alivio EZ Fire Plus · Front derailleur: Shimano Tourney TY-32, bottom-pull/clamp-on 31.8mm · Rear derailleur: Shimano MR-40 · Crankset: SR XR11, 28/38/48 teeth · Bottom bracket: Tien Hsin, 118mm spindle · Rear cogs: 7-speed, 11 - 34 teeth · Chain: KMC HG-50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Chang Star linear-pull brakes, Shimano AceraX levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Haro RC3, 36-hole · Hubs: Joy Tech aluminum, nutted · Front tire: 26 x 1.95" Kenda Kwick
Controls and contact points
Archived: Headset: 1 1/8" threadless YST CS558 · Handlebar: Steel, rise · Stem: Hsin Lung steel · Seatpost: Haro micro-adjust, 26.2mm diameter · Saddle: Haro Selle Comfort · Pedals: Resin
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.


