Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Handling

    1998 Haro Vector V1 has a 0.5° slacker head-tube angle than 1999 Haro Vector V1 in the archived geometry. Frame size is not identified for 1999 Haro Vector V1 and 1998 Haro Vector V1.

    Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.

  2. Gearing

    1999 Haro Vector V1 has a 18% lower climbing ratio than 1998 Haro Vector V1.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1999 Haro Vector V1Size Legacy reference · 48/38/28T · 11–34T · 7-speed
Lowest0.82:1Highest4.36:1Total range530%
Estimated speed at 90 RPMLowest gear5.7 mphHighest gear30.3 mph

Uses front tire 26×1.95; rear size isn’t listed.

1998 Haro Vector V1Size Legacy reference · 48/38/28T · 14–28T · 7-speed
Lowest1.00:1Highest3.43:1Total range343%
Estimated speed at 90 RPMLowest gear7.0 mphHighest gear24.1 mph

Uses front tire 26×2.1; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1999 Haro Vector V1
1998 Haro Vector V1
Overview
Model Year
1999
1998
Brand
Haro
Haro
Model
Vector V1
Vector V1
Bicycle Type
Mountain bike, front suspension
Mountain bike, non-suspension
Original MSRP
$270.00
$250.00
Colors
Anodized Blue, Mango
Black, Blurple, Matte Red
Sizes
13.5", 15.5", 17.5", 19.5", 21.5"
13.5", 15.5", 17.5", 19.5", 21.5"
Weight
31.5 lb
30.5 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
7005 aluminum
Chromoly/hi-tensile steel
Fork
SR Suntour M-6100, 2.5" travel
Haro R800 Big Fork
Fork Material
Aluminum/chromoly, triple-clamp crown
Hi-tensile steel, unicrown crown
Drivetrain
Component Group
Mountain Mix
Shimano Altus
Shifters
Shimano Alivio EZ Fire Plus
Shimano Altus EZ Fire Plus
Front Derailleur
Shimano Tourney TY-32, bottom-pull/clamp-on 31.8mm
Shimano Tourney TY-22 top-swing, bottom-pull/clamp-on 28.6mm
Rear Derailleur
Shimano MR-40
Shimano Altus
Crankset
SR XR11, 28/38/48 teeth
Shimano Tourney TY-30, 28/38/48 teeth
Bottom Bracket
Tien Hsin, 118mm spindle
YST, 122.5mm spindle
BB Shell Width
68mm English
68mm English
Rear Cogs
7-speed, 11 - 34 teeth
7-speed, 14 - 28 teeth
Chain
KMC HG-50, 1/2 x 3/32"
KMC UG-50, 1/2 x 3/32"
Pedals
Resin
Haro, resin
Brakes
Brakes
Chang Star linear-pull brakes, Shimano AceraX levers
Vanguard 694 brakes, Shimano Altus levers
Cockpit & Contact Points
Headset
1 1/8" threadless YST CS558
1" YST steel
Handlebar
Steel, rise
Wei Han ATB-6
Handlebar Extensions
Not included
Not included
Stem
Hsin Lung steel
Lee Chi
Saddle
Haro Selle Comfort
Haro Selle Comfort
Seatpost
Haro micro-adjust, 26.2mm diameter
Lee Chi, 25.8mm diameter
Wheels & Tires
Hubs
Joy Tech aluminum, nutted
Joy Tech aluminum, Q/R
Rims
Haro RC3, 36-hole
Araya GP-710, 36-hole
Spokes
Stainless steel, 2.0mm straight gauge
HTI steel, 2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 1.95" Kenda Kwick
26 x 2.10" Kenda K-849
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
71.5°
71°
Seat-tube angle
73°
73°
Chainstay / rear center
425.4 mm
425.4 mm
Wheelbase
1051.6 mm
1036.3 mm
Fork offset / rake
38.1 mm
45 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Scroll to Top