Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Data limitation

    No geometry is recorded for 1999 Easy Racer EZ-1.

  2. Gearing

    1995 Easy Racer EZ-1 has a 6% lower climbing ratio than 1999 Easy Racer EZ-1.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

  3. Identity & price

    1995 Easy Racer EZ-1 had an original MSRP $174 lower than 1999 Easy Racer EZ-1.

    Original MSRP is the published list price when new, not today’s used-bike value.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

1999 Easy Racer EZ-152/46/32T · 11–30T · 7-speed
Lowest1.07:1Highest4.73:1Total range443%

Speed unavailable: wheel or tire size is missing or unclear.

1995 Easy Racer EZ-1Size Legacy reference · 52/46/30T · 13–30T · 6-speed
Lowest1.00:1Highest4.00:1Total range400%

Speed unavailable: wheel or tire size is missing or unclear.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1999 Easy Racer EZ-1
1995 Easy Racer EZ-1
Overview
Model Year
1999
1995
Brand
Easy Racer
Easy Racer
Model
EZ-1
EZ-1
Bicycle Type
Recumbent
Recumbent
Original MSRP
$969.00
$795.00
Colors
Ferrari Red, Jet Black
Red, Yellow
Sizes
M, L
Medium-large, small-medium
Weight
28.9 lb
29 lb
Frameset
Frame Construction
TIG-welded
TIG-welded steel
Frame Material
Chromoly/hi-tensile steel
Chromoly / hi-tensile steel
Fork
Spinner
Easy Racer EZ-1
Fork Material
Hi-tensile steel, unicrown crown
Hi-tensile steel, unicrown crown
Drivetrain
Component Group
Recumbent Mix
Shimano Altus C50
Shifters
Grip Shift Centera
Shimano Tourney TY20 top-mount
Front Derailleur
Shimano AceraX top-swing
Shimano Tourney TY-20, bottom-pull/clamp-on 28.6 mm
Rear Derailleur
Shimano
Shimano Altus C50
Crankset
SR SX, 32/46/52 teeth
Sugino SX, 30/46/52 teeth
Bottom Bracket
Shimano BB-UN51
—
BB Shell Width
68mm English
—
Rear Cogs
7-speed, 11 - 30 teeth
6-speed, 13 - 30 teeth
Chain
Sedis, 1/2 x 3/32"
KMC Alpha 50, 1/2 x 3/32"
Pedals
SR/Sakae Low-fat
Victor Hi-Impact resin, toe-clip attachable
Brakes
Brakes
Shimano cantilever brakes, Tektro RBP-365A levers
Dia-Compe FXE brakes, Suntour XC Sport levers
Cockpit & Contact Points
Headset
1" YST
1" YST 200
Handlebar
Easy Racer custom
6061 T6 aluminum
Stem
Sr
SR CYS 50
Saddle
Recumbent mesh seat
Easy Racer Recliner-custom
Wheels & Tires
Hubs
Sovos sealed mechanism
Sovos sealed mechanism
Rims
Weinmann
Alesa 319K , 36-hole
Spokes
Sapim steel, 2.0mm straight gauge
2.0 mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
16 x 1 3/8"
16" Kenda
Rear Tire
20 x 1 3/8"
20 x 1 3/8" Kenda
Wheel Size
Front: 16", Rear: 20" wheels
Front: 16", Rear: 20" wheels
Geometry · choose a size for each bicycle
Geometry size
—
Head-tube angle
—
63.5°
Wheelbase
—
1346.2 mm
Fork offset / rake
—
50.8 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Sponsored affiliate link
Scroll to Top