- Frame
- 7005 aluminum
- Groupset
- Hybrid Mix
Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
- Frame
- Alpha ZX aluminum
- Groupset
- Hybrid Mix
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Handling
1998 Trek 7600 has a 0.5° slacker head-tube angle than 2000 Trek 7600 in the archived geometry. Frame size is not identified for 1998 Trek 7600 and 2000 Trek 7600.
Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.
- Gearing
1998 Trek 7600 has a 11% lower climbing ratio than 2000 Trek 7600.
A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
Uses front tire 700C×38; rear size isn’t listed.
Uses front tire 700C×38; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.