Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Handling

    2000 Rocky Mountain Thin Air has a 0.5° slacker head-tube angle than 1998 Rocky Mountain Thin Air in the archived geometry. Frame size is not identified for 2000 Rocky Mountain Thin Air and 1998 Rocky Mountain Thin Air.

    Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.

  2. Gearing

    2000 Rocky Mountain Thin Air has a 12% lower climbing ratio than 1998 Rocky Mountain Thin Air.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

  3. Identity & price

    2000 Rocky Mountain Thin Air had an original MSRP $362 lower than 1998 Rocky Mountain Thin Air.

    Original MSRP is the published list price when new, not today’s used-bike value.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

2000 Rocky Mountain Thin AirSize Legacy reference · 42/32/22T · 11–34T · 9-speed
Lowest0.65:1Highest3.82:1Total range590%
Estimated speed at 90 RPMLowest gear4.5 mphHighest gear26.4 mph

Uses front tire 26×1.9; rear size isn’t listed.

1998 Rocky Mountain Thin AirSize Legacy reference · 44/32/22T · 11–30T · 8-speed
Lowest0.73:1Highest4.00:1Total range545%
Estimated speed at 90 RPMLowest gear5.1 mphHighest gear27.8 mph

Uses front tire 26×1.95; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
2000 Rocky Mountain Thin Air
1998 Rocky Mountain Thin Air
Overview
Model Year
2000
1998
Brand
Rocky Mountain
Rocky Mountain
Model
Thin Air
Thin Air
Bicycle Type
Mountain bike, front suspension
Mountain bike, front suspension
Original MSRP
$1,577.00
$1,939.00
Colors
Lava Red
Red
Sizes
14.5", 16", 17.5", 18.5", 19.5", 21"
16", 17.5", 18.5", 19.5", 21"
Weight
—
24.4 lb
Frameset
Frame Construction
TIG-welded
Welded
Frame Material
Easton Elite
Easton Custom HBO aluminum
Fork
Marzocchi Bomber Z-2 Atom Bomb, 3.15" travel
Marzocchi Bomber Z-2
Fork Material
Aluminum, triple-clamp crown
Aluminum, triple-clamp crown
Drivetrain
Component Group
Mountain Mix
Grip Shift ESP 9.0SL/Shimano Deore XT
Shifters
Shimano Deore XT RapidFire SL
Grip Shift ESP 9.0SL
Front Derailleur
Shimano Deore LX, top-pull/clamp-on 31.8mm
Shimano Deore XT top-swing, top-pull/clamp-on 31.8mm
Rear Derailleur
Shimano Deore XT SGS
Grip Shift ESP 9.0SL
Crankset
Race Face Prodigy, 22/32/42 teeth
Race Face Turbine LP, 22/32/44 teeth
Bottom Bracket
Shimano BB-UN52, 113mm spindle
Shimano BB-UN72
BB Shell Width
73mm English
—
Rear Cogs
9-speed, 11 - 34 teeth
8-speed, 11 - 30 teeth
Chain
SRAM, 1/2 x 3/32"
Taya TB-700, 1/2 x 3/32"
Pedals
Shimano PD-M545 SPD
Ritchey Expert
Brakes
Brakes
Shimano Deore XT V-Brake brakes, SRAM 9.0 levers
Shimano Deore XT V-Brake brakes, Grip Shift ESP 9.0 levers
Cockpit & Contact Points
Headset
1 1/8" threadless Ritchey Logic
1 1/8" threadless Ritchey Fuzzy Logic
Handlebar
Race Face Prodigy Riser
Syncros
Handlebar Extensions
Not included
Not included
Stem
Race Face Prodigy
Syncros
Saddle
Selle Italia XO
Selle Italia Future Race
Seatpost
Rocky Mountain #1 cold forged, 26.8mm diameter
Syncros
Wheels & Tires
Hubs
Rocky Mountain o/s sealed
Shimano Deore XT
Rims
Mavic X221, 32-hole
Sun Rims CR17A
Spokes
DT stainless steel, 1.8mm straight gauge
DT stainless steel, 2.0mm double-butted
Spoke Nipples
Brass nipples
—
Front Tire
26 x 1.90" Geax Beaumont
26 x 1.95" WTB VelociRaptor 44/50 kevlar
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
70.5°
71°
Seat-tube angle
73°
73.5°
Chainstay / rear center
430 mm
—
Wheelbase
1056 mm
—
Fork offset / rake
—
40.6 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Campaign
Scroll to Top