Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Handling
2003 Fuji Captiva has a 1.4° slacker head-tube angle than 2004 Fuji Captiva in the archived geometry. Frame size is not identified for 2003 Fuji Captiva and 2004 Fuji Captiva.
Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest1.57:1Highest3.38:1Total range215%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×2.125; rear size isn’t listed.
Lowest1.57:1Highest3.38:1Total range215%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×2.125; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2003 Fuji Captiva
2004 Fuji Captiva
Overview
Model Year
2003
2004
Brand
Fuji
Fuji
Model
Captiva
Captiva
Bicycle Type
Cruiser
Cruiser
Original MSRP
$229.00
$269.99
Colors
Metallic White/Navy Pearl, Platinum/Magenta, Platinum/Olympic Red, Silver/Black
Black/Copper
Sizes
19", 22", womens 14", womens 17"
19", 21", 23", womens 14", womens 17"
Weight
34 lb
32 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Hi-tensile steel
Altair 1 Aluminum
Fork
Fuji Cruiser
Fuji Cruiser
Fork Material
Hi-tensile steel, unicrown crown
Hi-tensile steel, unicrown crown
Drivetrain
Shifters
SRAM MRX
SRAM MRX
Rear Derailleur
Shimano Tourney TY-22
Shimano Tourney
Crankset
1-piece chromoly, 44 teeth
1-piece chromoly, 44 teeth
Bottom Bracket
Vp
Vp
BB Shell Width
American
American
Rear Cogs
7-speed freewheel, 13 - 28 teeth
7-speed, 13 - 28 teeth
Chain
Shimano CN-UG50, 1/2 x 1/8"
KMC UG-50, 1/2 x 3/32"
Pedals
Wellgo Cruiser
Wellgo Cruiser
Brakes
Brakes
Aluminum linear-pull brakes, aluminum linear-pull levers
Aluminum linear-pull brakes, aluminum linear-pull levers
Cockpit & Contact Points
Headset
1" steel
1 1/8" threaded steel
Handlebar
Steel, cruiser
Steel, cruiser
Handlebar Extensions
Not included
Not included
Stem
Aluminum 4 bolt
Aluminum 4 bolt
Saddle
Fuji Cruiser
Fuji Cruiser
Seatpost
Aluminum, 25.6mm diameter
Aluminum
Wheels & Tires
Hubs
Aluminum, nutted
Aluminum, nutted
Rims
Aluminum, 36-hole
Aluminum, 36-hole
Spokes
Stainless steel, 14ga. (2.0mm) straight gauge
Stainless steel, 14ga. (2.0mm) straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 2.125" Kenda Cruiser
26 x 2.125" Kenda Kruiser
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
68.1°
69.5°
Seat-tube angle
69°
73°
Chainstay / rear center
520 mm
455 mm
Wheelbase
1144 mm
1145 mm
Fork offset / rake
38 mm
38 mm
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.