Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Handling

    1995 Nashbar 6000T has a 2.0° slacker head-tube angle than 1993 Nashbar 6000T in the archived geometry. Frame size is not identified for 1995 Nashbar 6000T and 1993 Nashbar 6000T.

    Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.

  2. Gearing

    1993 Nashbar 6000T has a 7% lower climbing ratio than 1995 Nashbar 6000T.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

1995 Nashbar 6000TSize Legacy reference · 46/36/26T · 12–28T · 7-speed
Lowest0.93:1Highest3.83:1Total range413%
Estimated speed at 90 RPMLowest gear6.8 mphHighest gear28.2 mph

Uses front tire 700C×38; rear size isn’t listed.

1993 Nashbar 6000TSize Legacy reference · 46/36/26T · 13–30T · 7-speed
Lowest0.87:1Highest3.54:1Total range408%
Estimated speed at 90 RPMLowest gear6.0 mphHighest gear24.6 mph

Rear tire: 26×2.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1995 Nashbar 6000T
1993 Nashbar 6000T
Overview
Model Year
1995
1993
Brand
Nashbar
Nashbar
Model
6000T
6000T
Bicycle Type
Touring
Touring
Original MSRP
$489.00
$549.00
Colors
Dark blue, Red
—
Sizes
19", 21", 23", 25"
19.5, 21, 23, 24.8
Weight
26 lb
25.5 lb
Frameset
Frame Construction
TIG-welded steel
TIG-welded steel
Frame Material
Tange chromoly, double-butted
Tange #2
Fork
Lung I LF-990/E97-a
Spinner SPT-848 chrome-moly
Fork Material
Chromoly, unicrown crown
—
Drivetrain
Component Group
—
Shimano Exage ES
Shifters
Shimano SL-BS50 600 Ultegra bar-end 7-speed
Shimano 600 Ultegra barcons
Front Derailleur
Shimano RSX (triple), bottom-pull
Shimano Exage ES
Rear Derailleur
Shimano RX-100 SGS
Shimano Exage ES
Crankset
Shimano RSX, 26/36/46 teeth
Shimano Exage ES, 26/36/46 teeth
Rear Cogs
7-speed, 12 - 28 teeth
7-speed, 13 - 30 teeth
Chain
Shimano CN-HG51, 1/2 x 3/32"
Shimano CN-HG70
Pedals
Not included
Wellgo LU-897A
Brakes
Brakes
Shimano AceraX brakes, Shimano RX-100 levers
Shimano RX100 brakes, levers
Cockpit & Contact Points
Headset
1" YST Sealed Tech
—
Handlebar
Hsin Lung alloy
Sakae CMB-200
Stem
Hsin Lung chromoly
Sakae CTS
Saddle
Vetta Gel Lite
Vetta Lite Gel
Seatpost
Kalloy SP-264, 26.6 mm diameter
Sakae CLE-100
Wheels & Tires
Hubs
Shimano AceraX
Shimano Exage
Rims
Araya VX-300, 36-hole
Araya VX-300, 36-hole
Spokes
Stainless steel, 2.0 mm straight gauge
—
Spoke Nipples
Brass nipples
—
Front Tire
700 x 38c Cheng Shin C-979
26 x 2.00" IRC Road Winner 2 Duro
Rear Tire
—
26 x 2.00"
Wheel Size
700c wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
70°
72°
Seat-tube angle
73°
72°
Chainstay / rear center
438.1 mm
431.8 mm
Wheelbase
1038.9 mm
1038.9 mm
Fork offset / rake
—
50.8 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Campaign
Scroll to Top