Lowest0.87:1
Highest3.54:1
Total range408%
Estimated speed At 90 RPM
Lowest gear
Highest gear
Rear tire: 26×2.
Velopedia Bicycle Archive
1993 Nashbar 6000T
Original specifications: Shimano Exage ES drivetrain · 26" wheels · 25.5 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #40718- Model year
- 1993
- Category
- Touring
- Original MSRP
- $549.00
- Sizes
- 19.5, 21, 23, 24.8
- Weight
- 25.5 lb
- Geometry
- Legacy reference
- In this record
- 21 specifications · original MSRP · geometry
Model history 2 other years
Browse other years
Compare side by side
Identification clues
1993 archived details
- Frame
- Tange #2
- Original equipment
- Shimano Exage ES
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildTange #2 · Shimano Exage ES · 26" wheels
Frameset
| Frame Construction | TIG-welded steel |
|---|---|
| Frame Material | Tange #2 |
| Fork | Spinner SPT-848 chrome-moly |
Drivetrain
| Component Group | Shimano Exage ES |
|---|---|
| Shifters | Shimano 600 Ultegra barcons |
| Front Derailleur | Shimano Exage ES |
| Rear Derailleur | Shimano Exage ES |
| Crankset | Shimano Exage ES, 26/36/46 teeth |
| Rear Cogs | 7-speed, 13 - 30 teeth |
| Chain | Shimano CN-HG70 |
| Pedals | Wellgo LU-897A |
Brakes
| Brakes | Shimano RX100 brakes, levers |
|---|
Cockpit & Contact Points
| Handlebar | Sakae CMB-200 |
|---|---|
| Stem | Sakae CTS |
| Saddle | Vetta Lite Gel |
| Seatpost | Sakae CLE-100 |
Wheels & Tires
| Hubs | Shimano Exage |
|---|---|
| Rims | Araya VX-300, 36-hole |
| Front Tire | 26 x 2.00" IRC Road Winner 2 Duro |
| Rear Tire | 26 x 2.00" |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Size
Measurement
Measurement
—
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 569 mm |
| Head-tube angle | 72° |
| Seat-tube angle | 72° |
| Chainstay / rear center | 431.8 mm |
| Wheelbase | 1038.9 mm |
| Fork offset / rake | 50.8 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
26 x 2.00" IRC Road Winner 2 Duro
Wellgo LU-897A
More parts (5)Fewer parts
Shimano Exage ES
26/36/46 teeth
Shimano Exage ES
Shimano Exage ES
Shimano 600 Ultegra barcons
Shimano Exage
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Front: 26 x 2.00" IRC Road Winner 2 Duro, Rear: 26 x 2.00"
- Drivetrain
- 7-speed
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded steel · Fork: Spinner SPT-848 chrome-moly
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Exage ES · Shifters: Shimano 600 Ultegra barcons · Front derailleur: Shimano Exage ES · Rear derailleur: Shimano Exage ES · Crankset: Shimano Exage ES, 26/36/46 teeth · Rear cogs: 7-speed, 13 - 30 teeth · Chain: Shimano CN-HG70
Brakes
Inspect the brakes →Archived: Brakes: Shimano RX100 brakes, levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Araya VX-300, 36-hole · Hubs: Shimano Exage · Front tire: Front: 26 x 2.00" IRC Road Winner 2 Duro, Rear: 26 x 2.00"
Controls and contact points
Archived: Handlebar: Sakae CMB-200 · Stem: Sakae CTS · Seatpost: Sakae CLE-100 · Saddle: Vetta Lite Gel · Pedals: Wellgo LU-897A
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.