Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Handling

    1996 Easy Racer EZ-1 has a 0.5° slacker head-tube angle than 1995 Easy Racer EZ-1 in the archived geometry. Frame size is not identified for 1995 Easy Racer EZ-1 and 1996 Easy Racer EZ-1.

    Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.

  2. Gearing

    1995 Easy Racer EZ-1 has a 18% lower climbing ratio than 1996 Easy Racer EZ-1.

    A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

1995 Easy Racer EZ-1Size Legacy reference · 52/46/30T · 13–30T · 6-speed
Lowest1.00:1Highest4.00:1Total range400%

Speed unavailable: wheel or tire size is missing or unclear.

1996 Easy Racer EZ-1Size Legacy reference · 53/46/34T · 13–28T · 6-speed
Lowest1.21:1Highest4.08:1Total range336%

Speed unavailable: wheel or tire size is missing or unclear.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
1995 Easy Racer EZ-1
1996 Easy Racer EZ-1
Overview
Model Year
1995
1996
Brand
Easy Racer
Easy Racer
Model
EZ-1
EZ-1
Bicycle Type
Recumbent
Recumbent
Original MSRP
$795.00
$795.00
Colors
Red, Yellow
Black, Red
Sizes
Medium-large, small-medium
M, L
Weight
29 lb
28.9 lb
Frameset
Frame Construction
TIG-welded steel
TIG-welded steel
Frame Material
Chromoly / hi-tensile steel
Chromoly/hi-tensile steel
Fork
Easy Racer EZ-1
Spinner
Fork Material
Hi-tensile steel, unicrown crown
Hi-tensile steel, unicrown crown
Drivetrain
Component Group
Shimano Altus C50
Shimano Altus
Shifters
Shimano Tourney TY20 top-mount
Shimano Altus top-mount
Front Derailleur
Shimano Tourney TY-20, bottom-pull/clamp-on 28.6 mm
Shimano Altus top-swing, bottom-pull/clamp-on 28.6 mm
Rear Derailleur
Shimano Altus C50
Shimano Altus
Crankset
Sugino SX, 30/46/52 teeth
SR alloy, 34/46/53 teeth
Bottom Bracket
—
YST, 122.5 mm spindle
BB Shell Width
—
68mm English
Rear Cogs
6-speed, 13 - 30 teeth
6-speed, 13 - 28 teeth
Chain
KMC Alpha 50, 1/2 x 3/32"
KMC Alpha 50, 1/2 x 3/32"
Pedals
Victor Hi-Impact resin, toe-clip attachable
Wellgo LU-895
Brakes
Brakes
Dia-Compe FXE brakes, Suntour XC Sport levers
Dia-Compe FS-E brakes, Tektro RBP-365A levers
Cockpit & Contact Points
Headset
1" YST 200
1" YST 300
Handlebar
6061 T6 aluminum
Easy Racer
Stem
SR CYS 50
SR alloy
Saddle
Easy Racer Recliner-custom
Aluminum frame recumbent
Wheels & Tires
Hubs
Sovos sealed mechanism
—
Rims
Alesa 319K , 36-hole
Weinmann alloy, 36-hole
Spokes
2.0 mm straight gauge
Sapim steel, 2.0mm straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
16" Kenda
16" Kenda K-148
Rear Tire
20 x 1 3/8" Kenda
20 x 1 3/8" Kenda K-148
Wheel Size
Front: 16", Rear: 20" wheels
Front: 16", Rear: 20" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
63.5°
63°
Wheelbase
1346.2 mm
1346.2 mm
Fork offset / rake
50.8 mm
44.4 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Sponsored affiliate link
Scroll to Top