Velopedia Bicycle Archive

Compare Bicycles

Compare published geometry, gearing and specifications for up to three bicycles.

1 of 2 bicycles

At a glance

Key differences

Supported differences are shown below. Data limitations are labeled separately.

  1. Handling

    2004 Cannondale F300 has a 1.0° slacker head-tube angle than 2003 Cannondale F300 in the archived geometry. Frame size is not identified for 2003 Cannondale F300 and 2004 Cannondale F300.

    Fork offset, tire size and wheelbase also affect steering; head angle alone is not a handling verdict.

Gearing comparison

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

2003 Cannondale F300Size Legacy reference · 44/32/22T · 11–34T · 8-speed
Lowest0.65:1Highest4.00:1Total range618%
Estimated speed at 90 RPMLowest gear4.5 mphHighest gear28.1 mph

Uses front tire 26×2.1; rear size isn’t listed.

2004 Cannondale F300Size Legacy reference · 44/32/22T · 11–34T · 8-speed
Lowest0.65:1Highest4.00:1Total range618%
Estimated speed at 90 RPMLowest gear4.5 mphHighest gear28.1 mph

Uses front tire 26×2.1; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Print / PDFCSV
Specification
2003 Cannondale F300
2004 Cannondale F300
Overview
Model Year
2003
2004
Brand
Cannondale
Cannondale
Model
F300
F300
Bicycle Type
Mountain bike, front suspension
Mountain bike, front suspension
Original MSRP
$529.99
$529.99
Colors
Black, Silver
Gray, Yellow
Sizes
S, M, L, XL
XS, S, M, L, XL
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
6061 T6 aluminum
6061 T6 aluminum
Fork
Answer Manitou Axel Comp
Rock Shox Judy TT
Fork Material
Aluminum/magnesium, single crown
Aluminum/magnesium, single crown
Drivetrain
Component Group
Mountain Mix
Mountain Mix
Shifters
Shimano Alivio RapidFire Plus
Shimano Alivio RapidFire Plus
Front Derailleur
Shimano Alivio
Shimano Alivio
Rear Derailleur
Shimano Deore
Shimano Deore
Crankset
Sugino X150, 22/32/44 teeth
TruVativ IsoFlow, 22/32/44 teeth
Bottom Bracket
Shimano taper, 113mm spindle
Shimano taper
Rear Cogs
8-speed, 11 - 34 teeth
8-speed, 11 - 34 teeth
Chain
1/2 x 3/32"
1/2 x 3/32"
Pedals
Wellgo LU-955A w/clips & straps
Wellgo LU-955A w/clips & straps
Brakes
Brakes
Cannondale Expert brakes, Shimano Alivio RapidFire Plus levers
Cannondale Expert brakes, Shimano Alivio RapidFire Plus levers
Cockpit & Contact Points
Headset
1 1/8" threadless aluminum threadless
1 1/8" threadless FSA Converter
Handlebar
Ritchey SC
Cannondale Fire
Handlebar Extensions
Not included
Not included
Stem
Aluminum threadless
Cannondale 3-D Forged
Saddle
Selle Royale Freedom Gel
Selle Royale Gel
Seatpost
Kalloy SP-263
Aluminum micro-adjust
Wheels & Tires
Hubs
Front: Shimano HB-RM40, Rear: Shimano FH-RM40
Cannondale Earth
Rims
Mavic X139, 32-hole
Cannondale Earth, 32-hole
Spokes
DT stainless steel, 15ga. (1.8mm) straight gauge
DT stainless steel, 15ga. (1.8mm) straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
26 x 2.10" IRC Mythos XC
26 x 2.10" IRC Serac XC
Wheel Size
26" wheels
26" wheels
Geometry · choose a size for each bicycle
Geometry size
Head-tube angle
71°
70°
Seat-tube angle
73.5°
73.5°
Chainstay / rear center
424.2 mm
424.2 mm
Wheelbase
1043.9 mm
1077 mm
Fork offset / rake
38.1 mm
45.7 mm

Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run. Legacy reference geometry is model-level historical data whose corresponding frame size is not identified; compare those dimensions as reference values rather than size-normalized fit data.

Sponsored affiliate link
Scroll to Top