Mountain · Non-electric
2011 Cannondale Flash Carbon 29'er 1
- Not published
- Original MSRP
- Not documented
Velopedia Bicycle Archive
Compare published geometry, gearing and specifications for up to three bicycles.
Mountain · Non-electric
Edit comparison
Search the Archive without leaving this comparison.
At a glance
Supported differences are shown below. Data limitations are labeled separately.
No geometry is recorded for 2011 Cannondale Flash Carbon 29'er 1 and 2010 Cannondale Flash Carbon 29'er 1.
2010 Cannondale Flash Carbon 29'er 1 has a 10% lower climbing ratio than 2011 Cannondale Flash Carbon 29'er 1.
A lower ratio gives more mechanical advantage; rear-wheel rollout determines distance per crank turn.
2011 Cannondale Flash Carbon 29'er 1 has 10 mm more front travel than 2010 Cannondale Flash Carbon 29'er 1 in the selected sizes.
Front travel is fork suspension stroke, not rear-wheel travel.
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
Uses front tire 29×2.25; rear size isn’t listed.
Uses front tire 29×2.25; rear size isn’t listed.
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run.