Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 2005 Raleigh M20 and 2004 Raleigh M20.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest0.82:1Highest4.36:1Total range530%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×1.95; rear size isn’t listed.
Lowest0.82:1Highest3.69:1Total range448%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 26×1.95; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2005 Raleigh M20
2004 Raleigh M20
Overview
Model Year
2005
2004
Brand
Raleigh
Raleigh
Model
M20
M20
Bicycle Type
Mountain bike, front suspension
Mountain bike, front suspension
Original MSRP
Not documented
$230.00
Colors
—
—
Sizes
—
12", 14", 16", 18", 20", 22", womens 12", womens 16", womens 18"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
Atomic 13 aluminum
6061 T6 aluminum
Fork
SR Suntour SR M2000, 63mm
SR Suntour M-2000, 63mm travel
Fork Material
Aluminum, single crown
Aluminum, single crown
Drivetrain
Component Group
Mountain Mix
Mountain Mix
Shifters
Shimano Revo RS-31
Shimano Revo RS31
Front Derailleur
Shimano FD-TY32
Shimano Tourney TY-32
Rear Derailleur
Shimano RD-TX-30
Shimano Tourney TX-30
Crankset
Shimano FC-TY33, 28/38/48 teeth
Shimano Tourney FC-TY33, 28/38/48 teeth
Bottom Bracket
Sealed cartridge
Semi-cartridge
Rear Cogs
7-speed, 11 - 34 teeth
7-speed, 13 - 34 teeth
Chain
KMC Z51, 1/2 x 3/32"
KMC Z51, 1/2 x 3/32"
Pedals
Resin platform
Resin MTB
Brakes
Brakes
Tektro 845AL brakes, Tektro levers
Tektro linear-pull brakes, Tektro linear-pull levers
Cockpit & Contact Points
Headset
1 1/8" threadless
1 1/8" threaded steel
Handlebar
Steel
Aluminum, 1.25" rise
Handlebar Extensions
Not included
Not included
Stem
Aluminum/steel
Steel
Saddle
Avenir ATB
Avenir ATB Vinyl
Seatpost
Aluminum micro-adjust
Aluminum micro-adjust, 27.2mm diameter
Wheels & Tires
Hubs
Joytech aluminum QR
Aluminum, Q/R
Rims
Alex R-1000, 36-hole
Alex aluminum, 36-hole
Spokes
Stainless steel, 14ga. (2.0mm) straight gauge
Steel, 14ga. (2.0mm) straight gauge
Spoke Nipples
—
Brass nipples
Front Tire
26 x 1.95" Kenda K-850
26 x 1.95" Kenda ATB
Wheel Size
26" wheels
26" wheels
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run.