Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 2005 KHS Raptor and 2007 KHS Raptor.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest1.43:1Highest2.86:1Total range200%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 20×2.25; rear size isn’t listed.
Lowest1.43:1Highest2.86:1Total range200%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 20×2; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2005 KHS Raptor
2007 KHS Raptor
Overview
Model Year
2005
2007
Brand
KHS
KHS
Model
Raptor
Raptor
Bicycle Type
Juvenile
Juvenile mountain bike, suspension
Original MSRP
$199.00
Not documented
Colors
Silver/Black, Silver/Light Blue
Black, Silver/Black (Boys), Silver/Pink (Girls)
Sizes
—
Boys 11", girls 11"
Weight
—
—
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
7005 aluminum
7005 aluminum
Fork
Mozo M-30, 65mm
Mozo M-30, 65mm travel
Fork Material
Aluminum, single crown
Aluminum/steel, single crown
Drivetrain
Component Group
Juvenile Mix
Shimano mix
Shifters
SRAM MRX
Shimano Revo
Rear Derailleur
Shimano Tourney TX-30
Shimano RD-TX30
Crankset
Aluminum, 40 teeth
Alloy Cotterless, 40 teeth
Bottom Bracket
VP-B33 cartridge
VP-B33
Rear Cogs
6-speed, 14 - 28 teeth
7-speed, 14 - 28 teeth
Chain
KMC Z51, 1/2 x 3/32"
KMC Z51
Pedals
Pvc
VP MTB
Brakes
Brakes
Aluminum linear-pull brakes, aluminum/resin levers
Alloy Linear Pull brakes, Alloy levers
Cockpit & Contact Points
Headset
—
1 1/8" threadless Threadless
Handlebar
Aluminum
Alloy
Handlebar Extensions
Not included
Not included
Stem
Aluminum
Alloy
Saddle
Khs
KHS Junior
Seatpost
Aluminum
Alloy
Wheels & Tires
Hubs
Formula aluminum
Formula alloy
Rims
Aluminum
Alloy 20", 36-hole
Spokes
UCP, 14ga. (2.0mm) straight gauge
UCP, 14ga. (2.0mm)
Spoke Nipples
Brass nipples
—
Front Tire
20 X 2.25" KHS MTB
20 x 2.00" KHS
Wheel Size
20" wheels
20" wheels
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run.