Velopedia Bicycle Archive
Compare Bicycles
Compare published geometry, gearing and specifications for up to three bicycles.
Edit comparison
Add a bicycle
Search the Archive without leaving this comparison.
1 of 2 bicycles
At a glance
Key differences
Supported differences are shown below. Data limitations are labeled separately.
- Data limitation
No geometry is recorded for 2005 KHS Raptor and 2004 KHS Raptor.
Gearing comparison
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
Lowest1.43:1Highest2.86:1Total range200%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 20×2.25; rear size isn’t listed.
Lowest1.43:1Highest2.86:1Total range200%
Estimated speed at 90 RPMLowest gearHighest gear
Uses front tire 20×2.25; rear size isn’t listed.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Complete specification tableShows different published values and gaps where a bicycle lacks data. Different wording reflects source language, not necessarily different components. Swipe for more columns.
Specification
2005 KHS Raptor
2004 KHS Raptor
Overview
Model Year
2005
2004
Brand
KHS
KHS
Model
Raptor
Raptor
Bicycle Type
Juvenile
Juvenile mountain bike, suspension
Original MSRP
$199.00
$219.00
Colors
Silver/Black, Silver/Light Blue
Silver/Black, Silver/Blue
Sizes
—
Boys, girls
Weight
—
26.5 lb
Frameset
Frame Construction
TIG-welded
TIG-welded
Frame Material
7005 aluminum
Hi-tensile steel
Fork
Mozo M-30, 65mm
Mozo M-30, 65mm travel
Fork Material
Aluminum, single crown
Aluminum/steel, single crown
Drivetrain
Component Group
Juvenile Mix
Juvenile Mix
Shifters
SRAM MRX
SEC Twistshift
Rear Derailleur
Shimano Tourney TX-30
Shimano Tourney TY-30
Crankset
Aluminum, 40 teeth
Steel, 40 teeth
Bottom Bracket
VP-B33 cartridge
VP-B33 cartridge
Rear Cogs
6-speed, 14 - 28 teeth
6-speed, 14 - 28 teeth
Chain
KMC Z51, 1/2 x 3/32"
KMC Z51, 1/2 x 3/32"
Pedals
Pvc
Platform, resin
Brakes
Brakes
Aluminum linear-pull brakes, aluminum/resin levers
Aluminum linear-pull brakes, aluminum linear-pull levers
Cockpit & Contact Points
Headset
—
1 1/8" steel
Handlebar
Aluminum
Steel, rise
Handlebar Extensions
Not included
Not included
Stem
Aluminum
Steel
Saddle
Khs
KHS Padded
Seatpost
Aluminum
Aluminum
Wheels & Tires
Hubs
Formula aluminum
Formula
Rims
Aluminum
Aluminum, 32-hole
Spokes
UCP, 14ga. (2.0mm) straight gauge
UCP, 14ga. (2.0mm) straight gauge
Spoke Nipples
Brass nipples
Brass nipples
Front Tire
20 X 2.25" KHS MTB
20 X 2.25" KHS MTB
Wheel Size
20" wheels
20" wheels
Historical specifications are presented as an archival reference. Components may have varied by market, size, or production run.