Uses front tire 26×1.75; rear size isn’t listed.
Velopedia Bicycle Archive
2000 Terry Flora
Original specifications: Shimano Alivio · 8-speed · mechanical rear derailleur · 26" wheels · 25 lb published weight.
Planning to sell? Draft your listing
At a glance
Archive #46763- Model year
- 2000
- Category
- City & Commuter
- Original MSRP
- $575.00
- Sizes
- 11", 14", 16", 18"
- Colors
- Blue
- Weight
- 25 lb
- Geometry
- Legacy reference
- In this record
- 27 specifications · archived image · original MSRP · geometry
Model history 1 other year
Browse other years
Compare side by side
Identification clues
2000 archived details
- Published colors
- Blue
- Frame
- Chromoly, double-butted
- Original equipment
- Hybrid Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildChromoly, double-butted · Hybrid Mix · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Chromoly, double-butted |
| Fork | Terry Flora Rigid |
| Fork Material | Chromoly, unicrown crown |
Drivetrain
| Component Group | Hybrid Mix |
|---|---|
| Shifters | Shimano STX-RC RapidFire SL |
| Front Derailleur | Shimano Alivio top-swing, top-pull/clamp-on 28.6mm |
| Rear Derailleur | Shimano Alivio |
| Crankset | Shimano Alivio, 22/32/42 teeth |
| Bottom Bracket | Shimano BB-LP27, 118mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 8-speed, 11 - 30 teeth |
| Chain | KMC IG-31, 1/2 x 3/32" |
| Pedals | Victor VP-933S w/clips & straps |
Brakes
| Brakes | Shimano STX-RC V-Brake brakes, Shimano STX-RC levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" YST steel |
|---|---|
| Handlebar | Alloy MTB |
| Handlebar Extensions | Alloy |
| Stem | Terry Hi ATB Stem |
| Saddle | Terry Bella Gella |
| Seatpost | Kalloy SP-243, 30.0mm diameter |
Wheels & Tires
| Hubs | Shimano Alivio |
|---|---|
| Rims | Sun Rims CR18, 32-hole |
| Spokes | Sha-Dar stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 26 x 1.75" Kenda K-831 |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 500.4 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 424.2 mm |
| Wheelbase | 1006.1 mm |
| Fork offset / rake | 50 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Shimano STX-RC levers
118mm spindle
More parts (5)Fewer parts
22/32/42 teeth
30.0mm diameter
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 1.75" Kenda K-831
- Drivetrain
- 8-speed
- Seatpost diameter
- 30 mm
- Bottom bracket / shell
- Shimano BB-LP27, 118mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Terry Flora Rigid · Chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Hybrid Mix · Shifters: Shimano STX-RC RapidFire SL · Front derailleur: Shimano Alivio top-swing, top-pull/clamp-on 28.6mm · Rear derailleur: Shimano Alivio · Crankset: Shimano Alivio, 22/32/42 teeth · Bottom bracket: Shimano BB-LP27, 118mm spindle · Rear cogs: 8-speed, 11 - 30 teeth · Chain: KMC IG-31, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano STX-RC V-Brake brakes, Shimano STX-RC levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Sun Rims CR18, 32-hole · Hubs: Shimano Alivio · Front tire: 26 x 1.75" Kenda K-831
Controls and contact points
Archived: Headset: 1 1/8" YST steel · Handlebar: Alloy MTB · Stem: Terry Hi ATB Stem · Seatpost: Kalloy SP-243, 30.0mm diameter · Saddle: Terry Bella Gella · Pedals: Victor VP-933S w/clips & straps
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.
