2015 Specialized P.26

Archived: 2015 Specialized P.26 · Mountain Hardtail · Published sizes: One Size

• Confirm the frame markings and seller description match this archived model. Note every component that differs from the published build.
• Record the frame serial number. It should be legible, unaltered and consistent with the seller’s ownership history.
• Find the size marking on the bicycle and confirm the fit before judging the condition or price.

Archived: Frame: Double-butted Reynolds 520 Cr-Mo, singlespeed-specific, integrated headset, MID BB shell, hydroformed chainstays, 3D forged horizontal dropouts w/ intl std disc mount · Fork: Manitou Circus Sport, coil spring, 1-1/8" steel steerer, hydraulic damping w/ preload adjustment., 9mm axle dropouts, mag post mount lower, 32mm steel stanchions, 80mm travel · Suspension

• Check paint damage, vent holes and accessible internal surfaces for corrosion. Look for dents, bent tubes and cracking around welded or brazed joints.
• Stand behind and in front of the bicycle to look for obvious frame, fork or wheel misalignment. Ask directly about crashes, transport damage and repairs.

Archived: Fork: Manitou Circus Sport, coil spring, 1-1/8" steel steerer, hydraulic damping w/ preload adjustment., 9mm axle dropouts, mag post mount lower, 32mm steel stanchions, 80mm travel

• Inspect the fork stanchions for scratches or coating wear, look for oil or dirt rings at the seals, and cycle the fork through its travel while checking for binding or bushing play.
• Ask for dated fork-service records. A clean exterior does not establish the condition of internal seals, oil or bushings.

Archived: Group: DJ mix · Crankset: P.Crank, 3 pc. Cr-Mo, tubular arms, 48-spline, 25T, Cr-Mo, P.Spline sprocket · Bottom bracket: MID BB, 2x sealed cartridge bearings w/ 19mm, 48-spline Cr-Mo spindle · Chain: KMC Z510H, BMX 1/2" x 1/8", anti-drop inner links

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: Tektro Aries, mechanical disc, organic pads

• Check both cables and housings for corrosion, fraying or drag. Confirm each caliper releases cleanly, then inspect pad thickness, rotor wear and rotor alignment.
• Before riding, test every installed brake separately at walking speed. Each should stop firmly and release cleanly without its control reaching the end of its usable travel.

Archived: Rims: P.26, alloy double-wall, triple void, 32mm inner width, 32h · Hubs: P.Series Dirt Jump disc, alloy, sealed cartridge bearings, loose ball, solid axle, 32h, P.Series Dirt Jump disc, alloy, sealed cartridge bearings, solid axle w/ track nut, 32h · Front tire: Specialized Rhythm Lite Sport, 60TPI, wire bead, 26x2.3", Specialized Compound Sport, 60TPI, wire bead, 26x2.2"

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Remove and reinstall or closely inspect both wheel-retention systems. Axles or quick releases should tighten correctly with undamaged threads, hardware and dropouts.

Archived: Headset: 1-1/8" integrated threadless, Campy style, full cartridge bearings, 8mm cone spacer · Handlebar: Specialized P.Series MTB Street, Cr-Mo steel, 11-degree backsweep, 2-degree upsweep, 60mm rise · Stem: Specialized P.Series BMX, forged alloy, top load, 52mm, 22.2mm clamp · Seatpost: Alloy, 0mm offset, 25.4mm, integrated w/ saddle · Saddle: P.Seat SL, 1 pc. w/ co-molded alloy 25.4mm seatpost · Pedals: Specialized P.Series, nylon platform w/ molded pins, loose ball, 9/16"

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.

• Before riding, confirm both wheels are secure, tires are safe, both brakes function, and the headset, handlebar, stem, cranks and pedals have no looseness.
• Begin at low speed. Test steering, braking and shifting progressively, then load the drivetrain and suspension only after the basic safety checks pass.
• Listen and feel for repeated knocks, grinding, skipping, brake pulsation or movement at joints. Stop the test if the bicycle cannot be controlled safely.