Uses front tire 700C×48; rear size isn’t listed.
Velopedia Bicycle Archive
2015 Specialized Awol X Poler
Original specifications: SRAM X9 · 10-speed · mechanical rear derailleur · 700c wheels.
Planning to sell? Draft your listing
At a glance
Archive #1398338- Model year
- 2015
- Category
- City & Commuter
- Original MSRP
- $2,000.00
- Sizes
- S, M, L, XL
- Colors
- POLER Orange
- In this record
- 23 specifications · archived image · original MSRP
Original buildChromoly · SRAM mix · 700c
Frameset
| Frame Construction | Fully butted premium Cr-Mo, heat treated |
|---|---|
| Frame Material | Chromoly |
| Fork | Butted premium Cr-Mo, unicrown, heat treated |
| Fork Material | Chromoly |
Drivetrain
| Component Group | SRAM mix |
|---|---|
| Shifters | SRAM Apex |
| Front Derailleur | SRAM Apex, braze-on |
| Rear Derailleur | SRAM X9 Type 2, 10-speed, long cage |
| Crankset | Forged alloy, 2 pc., 46/34, stamped AL6061 |
| Rear Cogs | SRAM PG 1030, 10-speed, 11-36 |
| Chain | KMC X10, 10-speed, reusable Missing Link |
| Pedals | Alloy, 1 pc. body, stamped cage, 9/16" |
Brakes
| Brakes | Tektro Spyre-CS, mechanical disc, dual pivot, 160mm rotor, stainless hardware |
|---|
Cockpit & Contact Points
| Headset | 1-1/8" sealed Cr-Mo cartridge bearings integrated w/ headset, 15mm cone spacer |
|---|---|
| Handlebar | Specialized AWOL, 6061 double-butted alloy, 12-degree flare-out, 31.8mm |
| Stem | Specialized 3D forged alloy, 4-bolt, 6-degree rise, anti-corrosion hardware |
| Saddle | Body Geometry Phenom, steel rails, 143mm |
| Seatpost | Specialized alloy, 27.2mm |
Wheels & Tires
| Hubs | Specialized Hi Lo disc, alloy, RCC bearing system, QR, 32h, Specialized Hi Lo disc, alloy, RCC bearing system, QR, 32h |
|---|---|
| Rims | 29" disc, Al6061-T6 double-wall, 622-21c, 32h |
| Spokes | Stainless, 2.0/1.8/2.0mm |
| Front Tire | Specialized Ground Control, 60TPI, 2Bliss Ready, folding bead, 700x48c |
| Wheel Size | 700c |
No specifications match. Try a component name or clear your search.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
10-speed, 11-36

SRAM PG-1030 Cassette 10 Speed, 11-36T
Model match
27.2mm

Race Face Ride XC Seatpost Black, 27.2x375mm
Replacement option
More parts (7)Fewer parts
60TPI, 2Bliss Ready, folding bead, 700x48c
braze-on
Before ordering: Confirm whether the drivetrain is mechanical or electronic before ordering.10-speed, long cage
6061 double-butted alloy, 12-degree flare-out, 31.8mm
4-bolt, 6-degree rise, anti-corrosion hardware
alloy, RCC bearing system, QR, 32h, Specialized Hi Lo disc, alloy, RCC bearing system, QR, 32h
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Specialized Ground Control, 60TPI, 2Bliss Ready, folding bead, 700x48c
- Drivetrain
- 10-speed
- Seatpost diameter
- 27.2 mm
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: Fully butted premium Cr-Mo, heat treated · Fork: Butted premium Cr-Mo, unicrown, heat treated · Chromoly
Drivetrain
Check drivetrain wear →Archived: Group: SRAM mix · Shifters: SRAM Apex · Front derailleur: SRAM Apex, braze-on · Rear derailleur: SRAM X9 Type 2, 10-speed, long cage · Crankset: Forged alloy, 2 pc., 46/34, stamped AL6061 · Rear cogs: SRAM PG 1030, 10-speed, 11-36 · Chain: KMC X10, 10-speed, reusable Missing Link
Brakes
Inspect the brakes →Archived: Brakes: Tektro Spyre-CS, mechanical disc, dual pivot, 160mm rotor, stainless hardware
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c · Rims: 29" disc, Al6061-T6 double-wall, 622-21c, 32h · Hubs: Specialized Hi Lo disc, alloy, RCC bearing system, QR, 32h, Specialized Hi Lo disc, alloy, RCC bearing system, QR, 32h · Front tire: Specialized Ground Control, 60TPI, 2Bliss Ready, folding bead, 700x48c
Controls and contact points
Archived: Headset: 1-1/8" sealed Cr-Mo cartridge bearings integrated w/ headset, 15mm cone spacer · Handlebar: Specialized AWOL, 6061 double-butted alloy, 12-degree flare-out, 31.8mm · Stem: Specialized 3D forged alloy, 4-bolt, 6-degree rise, anti-corrosion hardware · Seatpost: Specialized alloy, 27.2mm · Saddle: Body Geometry Phenom, steel rails, 143mm · Pedals: Alloy, 1 pc. body, stamped cage, 9/16"
Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.
This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.


