2006 Specialized Allez Pro

Archived: 2006 Specialized Allez Pro · Road race & triathlon · Published sizes: 50cm, 52cm, 54cm, 56cm, 58cm, 60cm, 62cm

• Confirm the frame markings and seller description match this archived model. Note every component that differs from the published build.
• Record the frame serial number. It should be legible, unaltered and consistent with the seller’s ownership history.
• Find the size marking on the bicycle and confirm the fit before judging the condition or price.

Archived: Frame: TIG-welded · Fork: Specialized FACT with Zertz inserts · Carbon/elastomer, aero crown

• Inspect the complete frame for cracks, dents, distortion, heavy abrasion, suspicious paint differences or evidence of a previous repair.
• Stand behind and in front of the bicycle to look for obvious frame, fork or wheel misalignment. Ask directly about crashes, transport damage and repairs.
• Inspect the fork crown, blades, dropouts and visible steerer area. Check that it is straight, securely installed and free of cracks or impact damage.

Archived: Group: Shimano Dura-Ace 10-Speed · Shifters: Shimano Dura-Ace, 10-speed, STI, flight deck compatible · Front derailleur: Shimano Dura-Ace, bottom-pull/clamp-on 31.8mm · Rear derailleur: Shimano Dura-Ace, short cage · Crankset: Shimano Dura-Ace, double crankset, Hollowtech II 2-piece design, 39/53 teeth · Bottom bracket: Shimano Dura-Ace Hollowtech II · Rear cogs: 10-speed, 12 - 27 teeth · Chain: Shimano Dura-Ace

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: Shimano Dura-Ace front/Shimano Dura-Ace Dual Pivot rear brakes, Shimano Dura-Ace, 10-speed, STI, flight deck compatible levers

• Inspect pads and braking surfaces, check the complete cable or hose path, and confirm both controls feel consistent and return cleanly.
• Before riding, test every installed brake separately at walking speed. Each should stop firmly and release cleanly without its control reaching the end of its usable travel.

Archived: Wheel size: 700c wheels · Rims: Shimano Dura-Ace, 16-hole/20-hole · Hubs: Front: Shimano Dura-Ace, Shimano QR, Rear: Shimano Dura-Ace, aluminum freehub body, Shimano QR · Front tire: 700 x 23c Specialized Mondo Pro, aramid bead, 120TPI

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Remove and reinstall or closely inspect both wheel-retention systems. Axles or quick releases should tighten correctly with undamaged threads, hardware and dropouts.

Archived: Headset: 1 1/8" Specialized Mindset Plus, integrated threadless, · Handlebar: S-Works FACT carbon aero handlebar, racing drop, ergo/aero shaping, 31.8 · Stem: S-Works FACT carbon stem, magnesium face plate, 31.8mm clamp · Seatpost: Specialized Pavé FACT carbon seatpost with Zertz insert, 27.2mm diameter · Saddle: Body Geometry Alias, carbon reinfoced base, hollow titanium rails · Pedals: Composite-body test ride pedals

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure. Look particularly closely for crushing, scoring or cracks at carbon handlebar clamp areas.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.

• Before riding, confirm both wheels are secure, tires are safe, both brakes function, and the headset, handlebar, stem, cranks and pedals have no looseness.
• Begin at low speed. Test steering, braking and shifting progressively, then load the drivetrain and suspension only after the basic safety checks pass.
• Listen and feel for repeated knocks, grinding, skipping, brake pulsation or movement at joints. Stop the test if the bicycle cannot be controlled safely.