
Velopedia Bicycle Archive
2004 Specialized Langster Pro
Original specifications: Track Mix drivetrain · 700c wheels · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #92322- Model year
- 2004
- Category
- Track
- Original MSRP
- $1,200.00
- Sizes
- 50cm, 52cm, 54cm, 56cm, 58cm, 62cm
- Colors
- White, Silver
- Geometry
- Legacy reference
- In this record
- 24 specifications · archived image · original MSRP · geometry
Model history 4 other years
Browse other years
Compare side by side
Identification clues
2004 archived details
- Published colors
- White, Silver
- Frame
- Specialized A1 aluminum
- Original equipment
- Track Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildSpecialized A1 aluminum · Track Mix · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Specialized A1 aluminum |
| Fork | Specialized C-3 |
| Fork Material | Carbon fiber composite w/aluminum steerer, unicrown crown |
Drivetrain
| Component Group | Track Mix |
|---|---|
| Crankset | Sugino SG-75, 48 teeth |
| Bottom Bracket | Sugino 75, 103mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 16 - 25 teeth |
| Chain | Izumi V, 1/2 x 1/8" |
| Pedals | Not included |
Brakes
| Brakes | Aluminum dual pivot rear |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" integrated aluminum |
|---|---|
| Handlebar | Nitto Track Bend |
| Handlebar Extensions | Not included |
| Stem | Aluminum |
| Saddle | Specialized Turbo |
| Seatpost | Specialized aluminum, 27.2mm diameter |
Wheels & Tires
| Hubs | Shimano Dura-Ace |
|---|---|
| Rims | Mavic Open Pro, 32-hole |
| Spokes | DT Champion stainless steel, 15/17ga. (1.8/1.5mm) double-butted |
| Spoke Nipples | Aluminum nipples |
| Front Tire | 700 x 23c Specialized Mondo Comp |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 555 mm |
| Head-tube angle | 74° |
| Seat-tube angle | 74.3° |
| Chainstay / rear center | 390 mm |
| Wheelbase | 968 mm |
| Fork offset / rake | 40 mm |
Frame size not recorded.
Gearing
Original gearing is incomplete. Enter your setup to calculate ratios and cadence speeds.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
27.2mm diameter
More parts (3)Fewer parts
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 23c Specialized Mondo Comp
- Drivetrain
- Track Mix
- Seatpost diameter
- 27.2 mm
- Bottom bracket / shell
- Sugino 75, 103mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Specialized C-3 · Carbon fiber composite w/aluminum steerer, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Track Mix · Crankset: Sugino SG-75, 48 teeth · Bottom bracket: Sugino 75, 103mm spindle · Rear cogs: 16 - 25 teeth · Chain: Izumi V, 1/2 x 1/8"
Brakes
Inspect the brakes →Archived: Brakes: Aluminum dual pivot rear
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Mavic Open Pro, 32-hole · Hubs: Shimano Dura-Ace · Front tire: 700 x 23c Specialized Mondo Comp
Controls and contact points
Archived: Headset: 1 1/8" integrated aluminum · Handlebar: Nitto Track Bend · Stem: Aluminum · Seatpost: Specialized aluminum, 27.2mm diameter · Saddle: Specialized Turbo · Pedals: Not included
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.



