Uses front tire 26×2; rear size isn’t listed.
Velopedia Bicycle Archive
2003 Specialized S-Works HT Disc
Original specifications: Shimano XTR · 9-speed · mechanical rear derailleur · 26" wheels · legacy reference geometry.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #30180- Model year
- 2003
- Category
- Mountain
- Sizes
- 13.5", 15.5", 17", 18", 19", 21"
- Colors
- Black Ano
- Geometry
- Legacy reference
- In this record
- 25 specifications · geometry
Model history 1 other year
Browse other years
Compare side by side
Identification clues
2003 archived details
- Published colors
- Black Ano
- Frame
- Specialized M5 Aluminum
- Original equipment
- Mountain Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildSpecialized M5 Aluminum · Mountain Mix · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Specialized M5 Aluminum |
| Fork | Rock Shox Sid World Cup, 80mm travel |
| Fork Material | Aluminum/magnesium, single crown |
Drivetrain
| Component Group | Mountain Mix |
|---|---|
| Shifters | Shimano XTR Dual Control STI |
| Front Derailleur | Shimano Deore XT top-swing, bottom-pull/clamp-on 34.9mm |
| Rear Derailleur | Shimano XTR SGS |
| Crankset | Shimano XTR M960, 22/32/44 teeth |
| Bottom Bracket | Shimano XTR |
| Rear Cogs | 9-speed, 11 - 32 teeth |
| Chain | Shimano CN-HG92, 1/2 x 3/32" |
| Pedals | Not included |
Brakes
| Brakes | Shimano XTR Disc Brake brakes, Shimano XTR RapidFire SL levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless Specialized cartridge |
|---|---|
| Handlebar | Specialized Carbon |
| Handlebar Extensions | Not included |
| Stem | Thomson Elite |
| Saddle | Specialized S-Works |
| Seatpost | Thomson Elite, 30.9mm diameter |
Wheels & Tires
| Hubs | Front: Specialized S-Works, Rear: DT Hugi |
|---|---|
| Rims | Mavic X317 Disc, 28-hole/32-hole |
| Spokes | DT stainless steel, 15/17ga. (1.8/1.5mm) double-butted |
| Front Tire | 26 x 2.00" Specialized S-Works Roll-X |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 600 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 424 mm |
| Wheelbase | 1056 mm |
| Fork offset / rake | 38.1 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
30.9mm diameter

Race Face Ride XC Seatpost Black, 30.9x375mm
Replacement option
More parts (6)Fewer parts
22/32/44 teeth
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 2.00" Specialized S-Works Roll-X
- Drivetrain
- 9-speed
- Seatpost diameter
- 30.9 mm
- Bottom bracket / shell
- Shimano XTR
Equipment inspection checks 11 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Rock Shox Sid World Cup, 80mm travel · Aluminum/magnesium, single crown
Suspension
Evaluate the suspension →Archived: Fork: Rock Shox Sid World Cup, 80mm travel
Drivetrain
Check drivetrain wear →Archived: Group: Mountain Mix · Shifters: Shimano XTR Dual Control STI · Front derailleur: Shimano Deore XT top-swing, bottom-pull/clamp-on 34.9mm · Rear derailleur: Shimano XTR SGS · Crankset: Shimano XTR M960, 22/32/44 teeth · Bottom bracket: Shimano XTR · Rear cogs: 9-speed, 11 - 32 teeth · Chain: Shimano CN-HG92, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano XTR Disc Brake brakes, Shimano XTR RapidFire SL levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Mavic X317 Disc, 28-hole/32-hole · Hubs: Front: Specialized S-Works, Rear: DT Hugi · Front tire: 26 x 2.00" Specialized S-Works Roll-X
Controls and contact points
Archived: Headset: 1 1/8" threadless Specialized cartridge · Handlebar: Specialized Carbon · Stem: Thomson Elite · Seatpost: Thomson Elite, 30.9mm diameter · Saddle: Specialized S-Works · Pedals: Not included
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.





