Uses front tire 700C×38; rear size isn’t listed.
Velopedia Bicycle Archive
2000 Specialized Crossroads
Original specifications: Shimano Acera · 7-speed · mechanical rear derailleur · 700c wheels · legacy reference geometry.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #46597- Model year
- 2000
- Category
- Hybrid
- Original MSRP
- $329.99
- Sizes
- 14.5", 16.5", 18", 20", 22", womens 16", womens 19"
- Colors
- Denim Blue/Dark Blue, Red/Dark Red
- Geometry
- Legacy reference
- In this record
- 26 specifications · original MSRP · geometry
Model history 15 other years
Browse other years
Compare side by side
Identification clues
2000 archived details
- Published colors
- Denim Blue/Dark Blue, Red/Dark Red
- Frame
- Chromoly
- Original equipment
- Hybrid Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildChromoly · Hybrid Mix · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Chromoly |
| Fork | Specialized |
| Fork Material | Chromoly, unicrown crown |
Drivetrain
| Component Group | Hybrid Mix |
|---|---|
| Shifters | SRAM MRX |
| Front Derailleur | Shimano Nexave 301 |
| Rear Derailleur | Shimano Acera |
| Crankset | SR CR200, 28/38/48 teeth |
| Bottom Bracket | Tange Seiki Sport |
| Rear Cogs | 7-speed, 11 - 28 teeth |
| Chain | Shimano, 1/2 x 3/32" |
| Pedals | Resin |
Brakes
| Brakes | Specialized alloy linear-pull brakes, alloy levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless Tange Seiki |
|---|---|
| Handlebar | Specialized alloy |
| Handlebar Extensions | Not included |
| Stem | Specialized adjustable alloy |
| Saddle | Specialized Supersoft |
| Seatpost | Aluminum, suspension, 26.2mm diameter |
Wheels & Tires
| Hubs | Front: alloy, Rear: Shimano C-200 |
|---|---|
| Rims | Araya PX-645, 36-hole |
| Spokes | Specialized stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 38c Specialized Nimbus |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 542.8 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 444.5 mm |
| Wheelbase | 1046.5 mm |
| Fork offset / rake | 45 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
1/2 x 3/32"
Replacement search: 7-speed bicycle chain Before ordering: Check chain width and length.alloy levers
More parts (3)Fewer parts
suspension, 26.2mm diameter
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 38c Specialized Nimbus
- Drivetrain
- 7-speed
- Seatpost diameter
- 26.2 mm
- Bottom bracket / shell
- Tange Seiki Sport
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Specialized · Chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Hybrid Mix · Shifters: SRAM MRX · Front derailleur: Shimano Nexave 301 · Rear derailleur: Shimano Acera · Crankset: SR CR200, 28/38/48 teeth · Bottom bracket: Tange Seiki Sport · Rear cogs: 7-speed, 11 - 28 teeth · Chain: Shimano, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Specialized alloy linear-pull brakes, alloy levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Araya PX-645, 36-hole · Hubs: Front: alloy, Rear: Shimano C-200 · Front tire: 700 x 38c Specialized Nimbus
Controls and contact points
Archived: Headset: 1 1/8" threadless Tange Seiki · Handlebar: Specialized alloy · Stem: Specialized adjustable alloy · Seatpost: Aluminum, suspension, 26.2mm diameter · Saddle: Specialized Supersoft · Pedals: Resin
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.



