Velopedia Bicycle Archive

2011 SE Racing Ripper

Original specifications: BMX Mix drivetrain · 20" wheels · 23.3 lb published weight.

Share owner experience

Planning to sell? Draft your listing

At a glance

Archive #25562
Model year
2011
Category
BMX
Original MSRP
$320.00
Sizes
20"
Colors
Black, Dark Matte Gray
Weight
23.3 lb
In this record
21 specifications · 7 archived images · original MSRP
Model history 5 other years

Browse other years

Compare side by side

Identification clues

2011 archived details

Published colors
Black, Dark Matte Gray
Frame
6061 aluminum
Original equipment
BMX Mix

Clues, not proof of model year. Colors vary and components may have been replaced.

Campaign
Original build6061 aluminum · BMX Mix · 20" wheels

Historical catalog variants

Archived sizes and colors

2 item records

Item-level catalog entries recovered from Velopedia’s original bicycle archive. They document how this model was listed historically; they do not identify the frame size associated with legacy reference geometry or indicate current availability.

Published sizes

20"

Published colors

BlackDark Matte Gray
View 2 archived size/color combinations
SizeColor
20"Black
20"Dark Matte Gray

Historical catalog evidence. Exact specifications and naming may vary by market, production run or manufacturer revision.

Frameset

Frame ConstructionAluminum
Frame Material6061 aluminum
ForkLanding Gear

Drivetrain

Component GroupBMX Mix
CranksetSE 3-pc chromoly 170mm, 43t teeth
Bottom BracketEuro Sealed
Rear Cogs1-speed, 16 teeth
ChainKMC Z410
PedalsFPD Alloy platform

Brakes

BrakesNone front/Rush V-Brake rear brakes, Rush 2-finger rear levers

Cockpit & Contact Points

Headset1 1/8" Tange Threadless
HandlebarSE Wing Bar, 25.5" x 7"
Handlebar ExtensionsBar ends
StemSE Front Load alloy
SaddleSE Racing
SeatpostRace Rocker micro adjust aluminum, 27.2mm diameter

Wheels & Tires

HubsSE Racing alloy
RimsAlex C-1000, 36-hole
Front Tire20 x 1.95" Kenda K-Rad
Rear Tire20 x 1.75" Kenda K-Rad
Wheel Size20" wheels

Gearing

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

All published sizes43T · 16T · 1-speed
Ratio2.69:1
Estimated speed At 90 RPM Gear14.0 mph

Rear tire: 20×1.75.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Try your current gearingChanged tires or gears? Calculate your setup.

Your changes apply to this calculation. The archived build stays unchanged.

Your gearing setup
Gears

Use up to three front tooth counts, separated by /. For one rear sprocket, enter the same count twice.

Rear tire

Apply the marking on your rear tire or edit its dimensions below. Older or fractional inch sizes need the ISO marking (e.g. 37-590).

For 32-622, width is 32 mm and rim diameter is 622 mm. Use the rear tire on mixed-wheel bikes. Leave both fields empty to compare ratios only.

Gear, dimension and cadence changes update results automatically.

Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.

Parts & serviceability

Find replacement parts

Original specifications
Seatpost · Original
Race Rocker micro adjust aluminum

27.2mm diameter

Retailer offers
Front tire · Original
20 x 1.95" Kenda K-Rad
Rear tire · Original
20 x 1.75" Kenda K-Rad
More parts (1)Fewer parts
Rims · Original
Alex C-1000

36-hole

Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.

Parts and service referenceQuick reference before buying parts

Archived specifications for reference. Check the fitted parts before ordering.

Front tire
Front: 20 x 1.95" Kenda K-Rad, Rear: 20 x 1.75" Kenda K-Rad
Drivetrain
1-speed
Seatpost diameter
27.2 mm
Bottom bracket / shell
Euro Sealed
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
0 of 10 checked Progress stays in this browser for this record.

Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.

Full used-bike inspection guide →

Archived: Frame: Aluminum · Fork: Landing Gear

Archived: Group: BMX Mix · Crankset: SE 3-pc chromoly 170mm, 43t teeth · Bottom bracket: Euro Sealed · Rear cogs: 1-speed, 16 teeth · Chain: KMC Z410

Archived: Brakes: None front/Rush V-Brake rear brakes, Rush 2-finger rear levers

Archived: Wheel size: 20" wheels · Rims: Alex C-1000, 36-hole · Hubs: SE Racing alloy · Front tire: Front: 20 x 1.95" Kenda K-Rad, Rear: 20 x 1.75" Kenda K-Rad

Controls and contact points

Archived: Headset: 1 1/8" Tange Threadless · Handlebar: SE Wing Bar, 25.5" x 7" · Stem: SE Front Load alloy · Seatpost: Race Rocker micro adjust aluminum, 27.2mm diameter · Saddle: SE Racing · Pedals: FPD Alloy platform

My Garage

Velopedia

Enter your email and Velopedia will send a private sign-in link. No password required.

Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.

This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.

Add fit, maintenance and buyer detailsOptional · five additional fields

Your contribution goes directly to Velopedia’s private review queue. We’ll email an optional confirmation link plus a private edit and withdrawal link, but you do not need to confirm your email before an administrator can review or approve the submission.

Already contributed? Send me a fresh private edit link

For privacy, Velopedia shows the same confirmation whether or not an experience exists.

Gallery7 images

Checking current listings…

Find this bike on eBay

Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.

Campaign

Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.

Scroll to Top