Ratio2.59:1
Estimated speed At 90 RPM
Gear
Rear tire: 24×1.75.
Velopedia Bicycle Archive
2004 SE Racing Floval Flyer
Original specifications: 24" wheels · legacy reference geometry.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #31809- Model year
- 2004
- Category
- BMX
- Original MSRP
- $400.00
- Sizes
- 24"
- Colors
- Brushed Aluminum
- Geometry
- Legacy reference
- In this record
- 21 specifications · original MSRP · geometry
Model history 2 other years
Browse other years
Compare side by side
Identification clues
2004 archived details
- Published colors
- Brushed Aluminum
- Frame
- SE Racing Certified 7005 Aluminum
- Original equipment
- N/A
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildSE Racing Certified 7005 Aluminum · 24" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | SE Racing Certified 7005 Aluminum |
| Fork | SE Racing Landing Gear |
| Fork Material | 4130 chromoly |
Drivetrain
| Crankset | SE Racing 3-pc, tubular, 180mm, 44 teeth |
|---|---|
| Bottom Bracket | Euro sealed cartridge, BMX splined |
| Rear Cogs | 1-speed, 17 teeth |
| Chain | KMC Z30, 1/2 x 3/32" |
| Pedals | Welgo alloy platform |
Brakes
| Brakes | Tektro 924ALV-brake rear brakes, Tektro 2 finger, alloy rear levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" integrated |
|---|---|
| Handlebar | SE Racing Wing Bar, 4130 CrMo |
| Stem | Se Racing BMX, alloy |
| Saddle | SE Racing BMX |
| Seatpost | SE Racing micro adjust, 350mm |
Wheels & Tires
| Hubs | SE Racing sealed bearing, alloy |
|---|---|
| Rims | SE Racing alloy, 36-hole |
| Spokes | Stainless steel, 14ga. (2.0mm) straight gauge |
| Front Tire | 24 x 2.125" Kenda Wide Track |
| Rear Tire | 24 x 1.75" Kenda Wide Track |
| Wheel Size | 24" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Size
Measurement
Measurement
—
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 4 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 533.4 mm |
| Head-tube angle | 73.5° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 393.7 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
KMC Z30
1/2 x 3/32"
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Front: 24 x 2.125" Kenda Wide Track, Rear: 24 x 1.75" Kenda Wide Track
- Drivetrain
- 1-speed
- Bottom bracket / shell
- Euro sealed cartridge, BMX splined
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: SE Racing Landing Gear · 4130 chromoly
Drivetrain
Check drivetrain wear →Archived: Crankset: SE Racing 3-pc, tubular, 180mm, 44 teeth · Bottom bracket: Euro sealed cartridge, BMX splined · Rear cogs: 1-speed, 17 teeth · Chain: KMC Z30, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Tektro 924ALV-brake rear brakes, Tektro 2 finger, alloy rear levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 24" wheels · Rims: SE Racing alloy, 36-hole · Hubs: SE Racing sealed bearing, alloy · Front tire: Front: 24 x 2.125" Kenda Wide Track, Rear: 24 x 1.75" Kenda Wide Track
Controls and contact points
Archived: Headset: 1 1/8" integrated · Handlebar: SE Racing Wing Bar, 4130 CrMo · Stem: Se Racing BMX, alloy · Seatpost: SE Racing micro adjust, 350mm · Saddle: SE Racing BMX · Pedals: Welgo alloy platform
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
- Category
- BMX cruiser
Same model · another year
Floval Flyer
Same model · another year
Floval Flyer
- Frame
- SE Racing Hi-Tesile steel
- Brakes
- Tektro 924A V-brake rear brakes, Tektro 2 finger, alloy rear levers
Same brand and year
Assassin
- Frame
- SE Racing Certified 7005 Aluminum
- Brakes
- Tektro 313A V-brake rear brakes, Tektro 2 finger, alloy rear levers
Same brand and year
Assassin Pro
Same category and period
Free Agent Limo 24
- Frame
- Chromoly
- Brakes
- Tektro alloy U-brake brakes, Tektro aluminum levers
Same category and period
Haro Master M5
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.