Velopedia Bicycle Archive

2003 Schwinn Solution 24"

Original specifications: Mountain Mix drivetrain · 24" wheels.

Share owner experience

Planning to sell? Draft your listing

No archive photo is available for this record.

At a glance

Archive #38454
Model year
2003
Category
Kids
Colors
Metallic Blue, Metallic Pink
In this record
26 specifications
Original buildHi-tensile steel · Mountain Mix · 24" wheels

Manufacturer catalog

Published sizes and colors

2 colors

Manufacturer-published sizes and colors; availability and exact size/color pairings may vary by market or production run.

Published colors

Metallic BlueMetallic Pink

Frameset

Frame ConstructionTIG-welded
Frame MaterialHi-tensile steel
ForkSchwinn
Fork MaterialHi-tensile steel, unicrown crown

Drivetrain

Component GroupMountain Mix
ShiftersSRAM MRX
Front DerailleurShimano C050, clamp-on
Rear DerailleurSRAM 3.0
CranksetSuntour XR-180, 24/34/42 teeth
Bottom BracketVP semi-cartridge
Rear Cogs7-speed, 14 - 28 teeth
ChainKMC Z51, 1/2 x 3/32"
PedalsResin MTB

Brakes

BrakesRadius Melt Forged brakes, Radius Die Cast levers

Cockpit & Contact Points

Headset1 1/8" VP sealed
Handlebar50mm rise
Handlebar ExtensionsNot included
StemQuill
SaddleSchwinn Anatomic
SeatpostAluminum micro-adjust

Wheels & Tires

HubsAluminum QR
RimsAluminum
SpokesStainless steel, 14ga. (2.0mm) straight gauge
Spoke NipplesBrass nipples
Front Tire24 x 1.95" all terrain
Wheel Size24" wheels

Gearing

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

Published build42/34/24T · 14–28T · 7-speed
Lowest0.86:1 Highest3.00:1 Total range350%
Estimated speed At 90 RPM Lowest gear5.5 mph Highest gear19.2 mph

Uses front tire 24×1.95; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Try your current gearingChanged tires or gears? Calculate your setup.

Your changes apply to this calculation. The archived build stays unchanged.

Your gearing setup
Gears

Use up to three front tooth counts, separated by /. For one rear sprocket, enter the same count twice.

Rear tire

Apply the marking on your rear tire or edit its dimensions below. Older or fractional inch sizes need the ISO marking (e.g. 37-590).

For 32-622, width is 32 mm and rim diameter is 622 mm. Use the rear tire on mixed-wheel bikes. Leave both fields empty to compare ratios only.

Gear, dimension and cadence changes update results automatically.

Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.

Parts & serviceability

Find replacement parts

Original specifications

Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.

Chain · Original
KMC Z51

1/2 x 3/32"

Front tire · Original
24 x 1.95" all terrain Replacement search: 24x1.95 bicycle tire Before ordering: Check rim type and tire clearance.

Based on the original build. Check fit and installed parts before ordering.

Parts and service referenceQuick reference before buying parts

Archived specifications for reference. Check the fitted parts before ordering.

Front tire
24 x 1.95" all terrain
Drivetrain
7-speed
Bottom bracket / shell
VP semi-cartridge
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
0 of 10 checked Progress stays in this browser for this record.

Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.

Full used-bike inspection guide →

Archived: Frame: TIG-welded · Fork: Schwinn · Hi-tensile steel, unicrown crown

Archived: Group: Mountain Mix · Shifters: SRAM MRX · Front derailleur: Shimano C050, clamp-on · Rear derailleur: SRAM 3.0 · Crankset: Suntour XR-180, 24/34/42 teeth · Bottom bracket: VP semi-cartridge · Rear cogs: 7-speed, 14 - 28 teeth · Chain: KMC Z51, 1/2 x 3/32"

Archived: Brakes: Radius Melt Forged brakes, Radius Die Cast levers

Archived: Wheel size: 24" wheels · Rims: Aluminum · Hubs: Aluminum QR · Front tire: 24 x 1.95" all terrain

Controls and contact points

Archived: Headset: 1 1/8" VP sealed · Handlebar: 50mm rise · Stem: Quill · Seatpost: Aluminum micro-adjust · Saddle: Schwinn Anatomic · Pedals: Resin MTB

My Garage

Velopedia

Enter your email and Velopedia will send a private sign-in link. No password required.

Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.

This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.

Add fit, maintenance and buyer detailsOptional · five additional fields

Your contribution goes directly to Velopedia’s private review queue. We’ll email an optional confirmation link plus a private edit and withdrawal link, but you do not need to confirm your email before an administrator can review or approve the submission.

Already contributed? Send me a fresh private edit link

For privacy, Velopedia shows the same confirmation whether or not an experience exists.

No recent price sample is available for this bike. Check eBay for matching listings.

Find this bike on eBay

Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.

Scroll to Top