2027 Santa Cruz Tallboy Deore

Archived: 2027 Santa Cruz Tallboy Deore · Mountain · Published sizes: XS, S, M, L, XL, XXL

• Confirm the frame markings and seller description match this archived model. Note every component that differs from the published build.
• Record the frame serial number. It should be legible, unaltered and consistent with the seller’s ownership history.
• Find the size marking on the bicycle and confirm the fit before judging the condition or price.

Archived: Frame: Carbon CC 29" 130mm Travel 4-Bar · Fork: RockShox Pike Base, 140mm

• Inspect the frame in bright light, especially the head tube, bottom-bracket area, chainstays and clamped surfaces. Look for cracks, ripples, crushed sections or signs of impact.
• Stand behind and in front of the bicycle to look for obvious frame, fork or wheel misalignment. Ask directly about crashes, transport damage and repairs.

Archived: Fork: RockShox Pike Base, 140mm · Rear shock: RockShox Deluxe Select+, 185x50

• Inspect the fork stanchions for scratches or coating wear, look for oil or dirt rings at the seals, and cycle the fork through its travel while checking for binding or bushing play.
• Inspect the shock shaft and seals, cycle the rear suspension through its travel and check for oil, air loss, binding or unusual top-out and bottom-out noises.
• Hold the rear brake and load the suspension from several directions. Check pivots, bearings and mounting hardware for knock, looseness or side play.
• Ask for dated fork, shock and pivot-service records. A clean exterior does not establish the condition of internal seals, oil, bushings or bearings.

Archived: Shifters: Shimano Deore M6200, 12spd w/ Wolf Tooth Shiftmount Adapter for MM · Rear derailleur: Shimano Deore M7200, 12spd · Crankset: Shimano Deore M6200, 32t XS-S: 165mm, M-XXL: 170mm · Bottom bracket: Shimano MT501 68/73mm Threaded · Cassette: Shimano Deore M6200, 10-51t · Chain: Shimano Deore M6100, 12spd

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: SRAM DB8

• Inspect pads and braking surfaces, check the complete cable or hose path, and confirm both controls feel consistent and return cleanly.
• Before riding, test every installed brake separately at walking speed. Each should stop firmly and release cleanly without its control reaching the end of its usable travel.

Archived: Wheel size: 29" · Rims: (F) Reserve 30|TR AL / (R) Reserve 30|TR AL · Hubs: (F) Shimano TC500, 15x110, 6-Bolt / (R) Shimano TC600, 12x148, MicroSpline, 6-Bolt · Front tire: Maxxis Forekaster 29"x2.4", MaxxTerra, EXO · Rear tire: Maxxis Forekaster 29"x2.4", MaxxTerra, EXO

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Remove and reinstall or closely inspect both wheel-retention systems. Axles or quick releases should tighten correctly with undamaged threads, hardware and dropouts.

Archived: Headset: FSA IS-2/47/42 ACB · Handlebar: Burgtec Aluminum Bar, 35mm XS-M: 760mm, 20mm Rise, L-XXL: 800mm, 30mm Rise · Stem: OneUp Enduro Stem All Sizes: 42mm · Seatpost: SDG Tellis Dropper, 31.6 XS: 125mm, S: 150mm, M: 170mm, L-XL: 210mm, XXL: 230mm · Saddle: SDG Bel-Air V3 Steel

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Cycle the dropper post repeatedly. It should reach full travel, remain extended under load and have no unusual oil, excessive rotational play or damaged remote, cable, hose or battery.

• Before riding, confirm both wheels are secure, tires are safe, both brakes function, and the headset, handlebar, stem, cranks and pedals have no looseness.
• Begin at low speed. Test steering, braking and shifting progressively, then load the drivetrain and suspension only after the basic safety checks pass.
• Listen and feel for repeated knocks, grinding, skipping, brake pulsation or movement at joints. Stop the test if the bicycle cannot be controlled safely.