Velopedia Bicycle Archive
1996 ReBike ReBike 2600 SE
Original specifications: Shimano Tourney TY-30 drivetrain · Front: 16", Rear: 26" wheels · 47.5 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #53678- Model year
- 1996
- Category
- Recumbent
- Original MSRP
- $599.95
- Sizes
- Adjustable for rider height:4' to 6'4"
- Colors
- Black, Light Blue
- Weight
- 47.5 lb
- Geometry
- Legacy reference
- In this record
- 25 specifications · original MSRP · geometry
Model history 1 other year
Browse other years
Compare side by side
Identification clues
1996 archived details
- Published colors
- Black, Light Blue
- Frame
- Hi-tensile steel
- Original equipment
- Shimano Tourney TY-30
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildHi-tensile steel · Shimano Tourney TY-30 · Front: 16", Rear: 26" wheels
Frameset
| Frame Construction | TIG-welded steel |
|---|---|
| Frame Material | Hi-tensile steel |
| Fork | ReBike 16 WP |
| Fork Material | Hi-tensile steel, unicrown crown |
Drivetrain
| Component Group | Shimano Tourney TY-30 |
|---|---|
| Shifters | ReBike LLS |
| Front Derailleur | Shimano Tourney TY-30, bottom-pull |
| Rear Derailleur | Shimano Tourney TY-30 |
| Crankset | 1-piece 6", 28/38/48 teeth |
| Bottom Bracket | One piece |
| BB Shell Width | 68mm Threadless |
| Rear Cogs | 6-speed, 14 - 28 teeth |
| Chain | KMC Alpha 50, 1/2 x 3/32" |
| Pedals | Steel/PVC |
Brakes
| Brakes | APSE cantilever brakes, APSE levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" ReBike LF |
|---|---|
| Handlebar | ReBike steel |
| Stem | ReBike 17 EXT |
| Saddle | ReBike w/padded backrest |
Wheels & Tires
| Rims | Steel, 28-hole/36-hole |
|---|---|
| Spokes | Steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 16 x 1.75" Duro |
| Rear Tire | 26 x 2.125" Duro |
| Wheel Size | Front: 16", Rear: 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 3 measurements
| Measurement | Legacy reference |
|---|---|
| Head-tube angle | 55° |
| Wheelbase | 1346.2 mm |
| Fork offset / rake | 25.4 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
Speed unavailable: wheel or tire size is missing or unclear.
Add your rear tire size to calculate speedHow it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission.
bottom-pull
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Front: 16 x 1.75" Duro, Rear: 26 x 2.125" Duro
- Drivetrain
- 6-speed
- Bottom bracket / shell
- One piece · 68mm Threadless
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded steel · Fork: ReBike 16 WP · Hi-tensile steel, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Tourney TY-30 · Shifters: ReBike LLS · Front derailleur: Shimano Tourney TY-30, bottom-pull · Rear derailleur: Shimano Tourney TY-30 · Crankset: 1-piece 6", 28/38/48 teeth · Bottom bracket: One piece · Rear cogs: 6-speed, 14 - 28 teeth · Chain: KMC Alpha 50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: APSE cantilever brakes, APSE levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: Front: 16", Rear: 26" wheels · Rims: Steel, 28-hole/36-hole · Front tire: Front: 16 x 1.75" Duro, Rear: 26 x 2.125" Duro
Controls and contact points
Archived: Headset: 1 1/8" ReBike LF · Handlebar: ReBike steel · Stem: ReBike 17 EXT · Saddle: ReBike w/padded backrest · Pedals: Steel/PVC
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.
