Velopedia Bicycle Archive
1996 Rans V-Rex GL63
Original specifications: Shimano Deore XT drivetrain · Front: 20", Rear: 24" wheels · 28 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #57630- Model year
- 1996
- Category
- Recumbent
- Original MSRP
- $2,399.99
- Sizes
- One size fits all
- Colors
- Buyer's choice
- Weight
- 28 lb
- Geometry
- Legacy reference
- In this record
- 25 specifications · original MSRP · geometry
Original build4130 chromoly · Shimano Deore XT · Front: 20", Rear: 24" wheels
Frameset
| Frame Construction | TIG-welded steel |
|---|---|
| Frame Material | 4130 chromoly |
| Fork | Spinner |
| Fork Material | 4130 chromoly, unicrown crown |
Drivetrain
| Component Group | Shimano Deore XT |
|---|---|
| Shifters | Grip Shift SRT-600 |
| Front Derailleur | Sachs Quarz, bottom-pull/clamp-on 28.6 mm |
| Rear Derailleur | Shimano Deore XT SGS |
| Crankset | Sachs Quarz, 34/46/56 teeth |
| Bottom Bracket | Shimano BB-UN51, 118 mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 3-speed internal x 7-speed, 11 - 28 teeth |
| Chain | Sachs SC40, 1/2 x 3/32" |
| Pedals | Not included |
Brakes
| Brakes | Magura Hydraulic HS22 brakes, Magura Hydrostop levers |
|---|
Cockpit & Contact Points
| Headset | 1" YST steel |
|---|---|
| Handlebar | Alloy |
| Stem | Alloy |
| Saddle | Recumbant mesh seat |
Wheels & Tires
| Rims | Araya 20A, 36-hole |
|---|---|
| Spokes | DT stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 20 x 1 1/8" IRC Roadlite EX |
| Rear Tire | 24 x 1 1/8" Panaracer |
| Wheel Size | Front: 20", Rear: 24" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 3 measurements
| Measurement | Legacy reference |
|---|---|
| Head-tube angle | 72° |
| Wheelbase | 996.9 mm |
| Fork offset / rake | 31.8 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
Speed unavailable: wheel or tire size is missing or unclear.
Add your rear tire size to calculate speedHow it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
118 mm spindle
34/46/56 teeth
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Front: 20 x 1 1/8" IRC Roadlite EX, Rear: 24 x 1 1/8" Panaracer
- Drivetrain
- Shimano Deore XT
- Bottom bracket / shell
- Shimano BB-UN51, 118 mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded steel · Fork: Spinner · 4130 chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Deore XT · Shifters: Grip Shift SRT-600 · Front derailleur: Sachs Quarz, bottom-pull/clamp-on 28.6 mm · Rear derailleur: Shimano Deore XT SGS · Crankset: Sachs Quarz, 34/46/56 teeth · Bottom bracket: Shimano BB-UN51, 118 mm spindle · Rear cogs: 3-speed internal x 7-speed, 11 - 28 teeth · Chain: Sachs SC40, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Magura Hydraulic HS22 brakes, Magura Hydrostop levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: Front: 20", Rear: 24" wheels · Rims: Araya 20A, 36-hole · Front tire: Front: 20 x 1 1/8" IRC Roadlite EX, Rear: 24 x 1 1/8" Panaracer
Controls and contact points
Archived: Headset: 1" YST steel · Handlebar: Alloy · Stem: Alloy · Saddle: Recumbant mesh seat · Pedals: Not included
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.