Uses front tire 700C×38; rear size isn’t listed.
Velopedia Bicycle Archive
1995 Raleigh C40
Original specifications: Shimano Altus C90 drivetrain · 700c wheels · legacy reference geometry.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #29073- Model year
- 1995
- Category
- Hybrid
- Original MSRP
- $289.99
- Sizes
- 15", 17", 19", 21", 23", womens 16", womens 19"
- Colors
- Gold/green doppler
- Geometry
- Legacy reference
- In this record
- 24 specifications · original MSRP · geometry
Model history 10 other years
Browse other years
Compare side by side
Identification clues
1995 archived details
- Published colors
- Gold/green doppler
- Frame
- Chromoly seat tube / hi-tensile steel
- Original equipment
- Shimano Altus C90
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildChromoly seat tube / hi-tensile steel · Shimano Altus C90 · 700c wheels
Frameset
| Frame Construction | TIG-welded steel |
|---|---|
| Frame Material | Chromoly seat tube / hi-tensile steel |
| Fork Material | Hi-tensile steel, unicrown crown |
Drivetrain
| Component Group | Shimano Altus C90 |
|---|---|
| Shifters | Grip Shift SRT-100 |
| Front Derailleur | Shimano Altus C90, bottom-pull/bottom bracket mount |
| Rear Derailleur | Shimano Altus C90 |
| Crankset | Shimano Altus C90, 24/32/48 teeth |
| Rear Cogs | 7-speed, 11 - 28 teeth |
| Chain | Shimano CN-UG50, 1/2 x 3/32" |
| Pedals | Wellgo Hi-Impact resin, toe-clip attachable |
Brakes
| Brakes | Shimano Altus C90 brakes, Lee Chi 319A levers |
|---|
Cockpit & Contact Points
| Headset | 1" Tien Hsin TH steel |
|---|---|
| Handlebar | Steel |
| Handlebar Extensions | Not included |
| Stem | Steel |
| Saddle | Vetta SE |
| Seatpost | Lee Chi alloy SP-204, 26.0 mm diameter |
Wheels & Tires
| Hubs | Shimano AceraX |
|---|---|
| Rims | Weinmann 217, 36-hole |
| Spokes | Stainless steel, 1.8 mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 38c Kenda Directional skinwall |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 556.3 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 431.8 mm |
| Wheelbase | 1038.9 mm |
| Fork offset / rake | 40 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts

Panaracer Gravelking SS+ Tire - Tubeless Black, 700x38
700x38c
Replacement option
toe-clip attachable
More parts (4)Fewer parts
24/32/48 teeth
26.0 mm diameter
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 38c Kenda Directional skinwall
- Drivetrain
- 7-speed
- Seatpost diameter
- 26 mm
Equipment inspection checks 9 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded steel · Fork: · Hi-tensile steel, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Altus C90 · Shifters: Grip Shift SRT-100 · Front derailleur: Shimano Altus C90, bottom-pull/bottom bracket mount · Rear derailleur: Shimano Altus C90 · Crankset: Shimano Altus C90, 24/32/48 teeth · Rear cogs: 7-speed, 11 - 28 teeth · Chain: Shimano CN-UG50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano Altus C90 brakes, Lee Chi 319A levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Weinmann 217, 36-hole · Hubs: Shimano AceraX · Front tire: 700 x 38c Kenda Directional skinwall
Controls and contact points
Archived: Headset: 1" Tien Hsin TH steel · Handlebar: Steel · Stem: Steel · Seatpost: Lee Chi alloy SP-204, 26.0 mm diameter · Saddle: Vetta SE · Pedals: Wellgo Hi-Impact resin, toe-clip attachable
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.