Lowest1.00:1
Highest3.43:1
Total range343%
Estimated speed At 90 RPM
Lowest gear
Highest gear
Uses front tire 26×1.95; rear size isn’t listed.
Velopedia Bicycle Archive
1993 Raleigh M30
Original specifications: Shimano Tourney drivetrain · 26" wheels · 30 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #43484- Model year
- 1993
- Category
- Mountain
- Original MSRP
- $250.00
- Sizes
- 13.5, 15.5, 17.5, 19.5, 21.5. Womens: 17, 19.
- Weight
- 30 lb
- Geometry
- Legacy reference
- In this record
- 20 specifications · original MSRP · geometry
Model history 6 other years
Browse other years
Compare side by side
Identification clues
1993 archived details
- Frame
- High-tensile/chrome-moly steel
- Original equipment
- Shimano Tourney
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildHigh-tensile/chrome-moly steel · Shimano Tourney · 26" wheels
Frameset
| Frame Construction | TIG-welded steel |
|---|---|
| Frame Material | High-tensile/chrome-moly steel |
| Fork | High-tensile steel |
Drivetrain
| Component Group | Shimano Tourney |
|---|---|
| Shifters | Shimano Tourney 15 thumbshifters |
| Front Derailleur | Shimano Tourney 15 |
| Rear Derailleur | Shimano Tourney 15 |
| Crankset | SR aluminum, 28/38/48 teeth |
| Rear Cogs | 5-speed, 14 - 28 teeth |
| Chain | KMC HP-20 |
| Pedals | Resin Mtn. Sport |
Brakes
| Brakes | Lee Chi 717A brakes, levers |
|---|
Cockpit & Contact Points
| Handlebar | Steel, Flat |
|---|---|
| Stem | TIG Steel |
| Saddle | Lycra Raleigh |
| Seatpost | Steel Blk 300mm |
Wheels & Tires
| Hubs | Front: King Kong 337, Rear: King Kong alloy |
|---|---|
| Rims | Araya MP-22, 36-hole |
| Front Tire | 26 x 1.95" Cheng Shin |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Size
Measurement
Measurement
—
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 5 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 558.8 mm |
| Head-tube angle | 70° |
| Seat-tube angle | 70° |
| Chainstay / rear center | 436.1 mm |
| Fork offset / rake | 45 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
26 x 1.95" Cheng Shin
Replacement search: 26x1.95 bicycle tire Before ordering: Check rim type and tire clearance.
Shimano Tourney 15
Shimano Tourney 15
More parts (1)Fewer parts
Shimano Tourney 15 thumbshifters
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 1.95" Cheng Shin
- Drivetrain
- 5-speed
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded steel · Fork: High-tensile steel
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Tourney · Shifters: Shimano Tourney 15 thumbshifters · Front derailleur: Shimano Tourney 15 · Rear derailleur: Shimano Tourney 15 · Crankset: SR aluminum, 28/38/48 teeth · Rear cogs: 5-speed, 14 - 28 teeth · Chain: KMC HP-20
Brakes
Inspect the brakes →Archived: Brakes: Lee Chi 717A brakes, levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Araya MP-22, 36-hole · Hubs: Front: King Kong 337, Rear: King Kong alloy · Front tire: 26 x 1.95" Cheng Shin
Controls and contact points
Archived: Handlebar: Steel, Flat · Stem: TIG Steel · Seatpost: Steel Blk 300mm · Saddle: Lycra Raleigh · Pedals: Resin Mtn. Sport
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.