2025 Polygon Collosus TE 0 AXS

Archived: Frame: ACX CARBON E-TRAIL 150mm TRAVEL · Fork: ROCKSHOX LYRIK ULTIMATE, 160mm TRAVEL

• Inspect the frame in bright light, especially the head tube, bottom-bracket area, chainstays and clamped surfaces. Look for cracks, ripples, crushed sections or signs of impact.

Archived: Fork: ROCKSHOX LYRIK ULTIMATE, 160mm TRAVEL · Rear shock: ROCKSHOX SUPER DELUXE SELECT+, E2E 230x60mm

• Inspect the fork stanchions for scratches or coating wear, look for oil or dirt rings at the seals, and cycle the fork through its travel while checking for binding or bushing play.
• Inspect the shock shaft and seals, cycle the rear suspension through its travel and check for oil, air loss, binding or unusual top-out and bottom-out noises.
• Hold the rear brake and load the suspension from several directions. Check pivots, bearings and mounting hardware for knock, looseness or side play.
• Ask for dated fork, shock and pivot-service records. A clean exterior does not establish the condition of internal seals, oil, bushings or bearings.

Archived: Shifters: SRAM EC AXS POD CONTROLLER, 1x12-SPEED · Rear derailleur: SRAM XX EAGLE T-TYPE AXS · Crankset: PRAXIS EC TYPE 2, 34T · Cassette: SRAM XS-1297-A1 XX EAGLE T-TYPE, 10-52T XD DRIVER · Chain: SRAM XX EAGLE T-TYPE

• Confirm every shift battery charges and every control operates. Shift through the full cassette under light load while checking pairing, derailleur alignment and response at both ends of the range.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: MAGURA MT7 HYDRAULIC DISC; Levers: MAGURA MT7 W/ HC3 LEVER; Rotors: MAGURA MDR C, 203MM 6-BOLT

• Squeeze each lever firmly. It should feel consistent and return cleanly. Check levers, hoses and calipers for fluid, inspect pad thickness and contamination, and examine rotors for wear or bending.

Archived: Wheels: MT9 TUBELESS READY · Rims: ALLOY DOUBLE WALL FV H:18mm 622x36 32H FOR TYRE 622-54/76 W/ TUBELESS TAPE · Hubs: F: DT SWISS 370 HYBRID CLASSIC 15x110mm 32H 6-BOLT / R: DT SWISS 370 HYBRID CLASSIC 12x148mm 32H 6-BOLT FOR XD DRIVER · Front tire: MAXXIS DISSECTOR 29"x2.40" 622x61 TUBELESS READY · Rear tire: MAXXIS DISSECTOR 29"x2.40" 622x61 TUBELESS READY

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Confirm whether the bike is actually set up tubeless, whether both tires hold pressure, and when sealant and rim tape were last serviced.

Archived: Headset: FSA NO.42/47/ACB, IS 42/28.6 | IS 52/40 · Handlebar: RACE FACE CHESTER 35, W: 780mm, BB: 35mm, R/D: 35mm, B: 8degree · Stem: RACE FACE AFFECT R 35, EXT: 40mm, BB: 35mm, R/D: 0mm · Seatpost: TRANZ X JD-YSP39KL 170mm (S, M) / 200mm (L, XL) TRAVEL, DxL: 34.9x495mm (S, M) / 556mm (L, XL) · Saddle: XTENT

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.

Archived: Motor: BOSCH PERFORMANCE LINE CX BDU3840 · Battery: BOSCH POWERTUBE 800 HORIZONTAL

• Inspect the battery case, mount, lock and electrical contacts for cracks, impact, corrosion, swelling, overheating marks or looseness. Confirm the battery charges normally.
• Confirm the correct charger, battery keys and removable system parts are included. Check charger cables and connectors for damage or improvised repairs.
• Power the system on from cold, check the display for warnings, and test every assist mode. Assistance should engage and stop predictably without intermittent cutouts or abnormal motor noise.
• Ask for available battery-health, cycle-count, diagnostic and firmware records. Confirm that replacement batteries and system support remain available before agreeing on value.