2024 Polygon Siskiu HE (Bosch)

Archived: Frame: ALX E-SUV 120mm TRAVEL · Fork: SR SUNTOUR MOBIE 36 BOOST, AIR SPRING, EQUALIZER,130mm TRAVEL, OFFSET: 44mm, 3CR-PCS

• Look for dents or shape changes and inspect the edges of welds around the head tube, bottom bracket, seat cluster and suspension mounts for hairline cracks.

Archived: Fork: SR SUNTOUR MOBIE 36 BOOST, AIR SPRING, EQUALIZER,130mm TRAVEL, OFFSET: 44mm, 3CR-PCS · Rear shock: SR SUNTOUR EDGE PLUS 2CR, E2E: 190x45mm

• Inspect the fork stanchions for scratches or coating wear, look for oil or dirt rings at the seals, and cycle the fork through its travel while checking for binding or bushing play.
• Inspect the shock shaft and seals, cycle the rear suspension through its travel and check for oil, air loss, binding or unusual top-out and bottom-out noises.
• Hold the rear brake and load the suspension from several directions. Check pivots, bearings and mounting hardware for knock, looseness or side play.
• Ask for dated fork, shock and pivot-service records. A clean exterior does not establish the condition of internal seals, oil, bushings or bearings.

Archived: Shifters: SRAM SX EAGLE, 1X12-SPEED TRIGGER · Rear derailleur: SRAM NX EAGLE 12-SPEED · Crankset: SRAM X-SYNC 2 38T · Cassette: SRAM CS-PG-1210-A1 EAGLE 12-SPEED 11-50T CASSETTE · Chain: SRAM SX EAGLE 12-SPEED

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: SRAM CODE-R HYDRAULIC; Levers: SRAM CODE R; Rotors: SRAM CENTERLINE CENTERLOCK 200MM

• Squeeze each lever firmly. It should feel consistent and return cleanly. Check levers, hoses and calipers for fluid, inspect pad thickness and contamination, and examine rotors for wear or bending.

Archived: Wheels: MT9 TUBELESS READY · Rims: F: ALLOY DOUBLE WALL FV H:18mm 622x36 32H FOR TYRE 622-54/76 W/ TUBELESS TAPE / R: ALLOY DOUBLE WALL FV H:18mm 584x36 32H FOR TYRE 584-54/76 W/ TUBELESS TAPE · Hubs: F: SHIMANO HB-TC500 15x110mm 32H CL / R: SHIMANO FH-TC500 12x148mm 32H CL FOR CASSETTE · Front tire: SCHWALBE HURRICANE F: 29"x2.40" / R: 27.5"x2.4" 622/584x62 ALLROUND TIRE TLE ADDIX, MAX: 29"x2.60" · Rear tire: SCHWALBE HURRICANE F: 29"x2.40" / R: 27.5"x2.4" 622/584x62 ALLROUND TIRE TLE ADDIX, MAX: 29"x2.60"

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance. This record indicates different front and rear wheel diameters, so verify each tire at its correct end.
• Confirm whether the bike is actually set up tubeless, whether both tires hold pressure, and when sealant and rim tape were last serviced.

Archived: Headset: FSA HBS-220 W/ SEALED BEARING, ZS 44/28.6 | ZS 56/40 · Handlebar: POLYGON EXPERT, W: 780mm, BB: 31.8mm, R/D: 50mm, B:9degree · Stem: ALLOY STEM, EXT: 60mm, BB: 31.8mm, R/D: 5MM · Seatpost: TRANZ X JD-YSP23JL 150mm (S, M) / 170mm (L, XL) TRAVEL, DxL: 30.9 x 459mm (S, M) / 499mm (L, XL) · Saddle: EASE, STEEL ø7mm · Pedals: ALLOY FLAT W/ REPLACEABLE PIN

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.

Archived: Motor: BOSCH PERFORMANCE LINE CX · Battery: BOSCH POWER TUBE 625 HORIZONTAL

• Inspect the battery case, mount, lock and electrical contacts for cracks, impact, corrosion, swelling, overheating marks or looseness. Confirm the battery charges normally.
• Confirm the correct charger, battery keys and removable system parts are included. Check charger cables and connectors for damage or improvised repairs.
• Power the system on from cold, check the display for warnings, and test every assist mode. Assistance should engage and stop predictably without intermittent cutouts or abnormal motor noise.
• Ask for available battery-health, cycle-count, diagnostic and firmware records. Confirm that replacement batteries and system support remain available before agreeing on value.