2024 Polygon Kalosi Lanes Prime

Archived: Frame: ALX e-CITY COMMUTING 75mm TRAVEL · Fork: SR SUNTOUR MOBIE 32

• Look for dents or shape changes and inspect the edges of welds around the head tube, bottom bracket, seat cluster and suspension mounts for hairline cracks.

Archived: Fork: SR SUNTOUR MOBIE 32

• Inspect the fork stanchions for scratches or coating wear, look for oil or dirt rings at the seals, and cycle the fork through its travel while checking for binding or bushing play.
• Ask for dated fork-service records. A clean exterior does not establish the condition of internal seals, oil or bushings.

Archived: Shifters: SHIMANO CUES SL-U6000 11-SPEED TRIGGER · Rear derailleur: SHIMANO CUES RD-U6000 11-SPEED · Crankset: SAMOX P202 44T · Cassette: SHIMANO CUES CS-LG400 11-SPEED 11-50T CASSETTE · Chain: KMC EGLIDE 9/10/11 SPEED

• Shift through every available gear under light load. Hesitation, skipping or inconsistent indexing can reflect wear, damage, poor adjustment or mismatched replacement parts.
• Measure chain wear with a compatible gauge and inspect chainring, cassette or freewheel teeth. A new chain does not rule out wear in the remaining drivetrain.
• Turn the cranks slowly, feel for rough bearings and check for side-to-side play. Inspect crank arms, chainring bolts and pedal threads for looseness or damage.

Archived: Brakes: SHIMANO BR-MT410 HYDRAULIC; Levers: SHIMANO BL-MT401; Rotors: SHIMANO SM-RT30 CENTERLOCK 180MM

• Squeeze each lever firmly. It should feel consistent and return cleanly. Check levers, hoses and calipers for fluid, inspect pad thickness and contamination, and examine rotors for wear or bending.

Archived: Wheels: ALLOY DOUBLE WALL TUBELESS READY · Rims: F; SHIMANO HB-TC500 15x100mm 32H CL / R: ALLOY DOUBLE WALL FV H:17.5mm 584x34 32H FOR TYRE 584-54/71 · Hubs: F: SHIMANO HB-TC500 15x100mm 32H CL / R: SHIMANO FH-MT200 10x141mm 32H CL FOR CASSETTE · Front tire: SCHWALBE HURRICANE F & R: 27.5"x2.4" 622/584x62 ALLROUND TIRE TLE ADDIX · Rear tire: SCHWALBE HURRICANE F & R: 27.5"x2.4" 622/584x62 ALLROUND TIRE TLE ADDIX

• Spin both wheels and watch for side-to-side and vertical movement. Check spoke tension, rim condition and hub play.
• Inspect both tire casings for cuts, cracking, plugs, bulges or exposed threads and confirm the installed sizes are safe for the rims and available frame and fork clearance.
• Confirm whether the bike is actually set up tubeless, whether both tires hold pressure, and when sealant and rim tape were last serviced.

Archived: Headset: INTEGRATED SEALED BEARING FOR OS HEAD TUBE, IS 52/28.6 | IS 52/40 · Handlebar: POLYGON EXPERT, W: 700mm, BB: 31.8mm, R/D: 25mm, B: 18degree · Stem: ADJUSTABLE STEM, EXT: 75mm (S-M) 90mm (L), BB: 31.8mm, R/D: 90degree · Seatpost: POLYGON XPERT, DxL: 30.9 x 300mm · Saddle: EASE, STEEL ø7mm · Pedals: ALLOY FLAT

• Apply the front brake and rock the bike to check for headset play or notchiness. Inspect the stem, handlebar and clamp zones, then confirm every fastener and control is secure.
• Check that the seatpost moves for adjustment and that the saddle, post and clamp hold securely without cracks, severe corrosion or damaged hardware.

Archived: Motor: BOSCH ACTIVE LINE PLUS BDU3340 · Battery: BOSCH POWER TUBE 625 HORIZONTAL

• Inspect the battery case, mount, lock and electrical contacts for cracks, impact, corrosion, swelling, overheating marks or looseness. Confirm the battery charges normally.
• Confirm the correct charger, battery keys and removable system parts are included. Check charger cables and connectors for damage or improvised repairs.
• Power the system on from cold, check the display for warnings, and test every assist mode. Assistance should engage and stop predictably without intermittent cutouts or abnormal motor noise.
• Ask for available battery-health, cycle-count, diagnostic and firmware records. Confirm that replacement batteries and system support remain available before agreeing on value.