Uses front tire 700C×38; rear size isn’t listed.
Velopedia Bicycle Archive
1999 Peugeot Liberty
Original specifications: Hybrid Mix drivetrain · 700c wheels · 34.1 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #80073- Model year
- 1999
- Category
- Hybrid
- Original MSRP
- $525.00
- Sizes
- 42cm, 47cm
- Colors
- Raisin
- Weight
- 34.1 lb
- In this record
- 25 specifications · original MSRP
Model history 5 other years
Browse other years
Compare side by side
Identification clues
1999 archived details
- Published colors
- Raisin
- Frame
- Chromoly
- Original equipment
- Hybrid Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildChromoly · Hybrid Mix · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Chromoly |
| Fork | RST 801, 1.6" travel |
| Fork Material | Aluminum/chromoly, unicrown crown |
Drivetrain
| Component Group | Hybrid Mix |
|---|---|
| Front Derailleur | Shimano Alivio top-swing, top-pull |
| Rear Derailleur | Shimano AceraX |
| Crankset | CYC-AL344 SQS, 24/34/42 teeth |
| Bottom Bracket | TE-BB-92, 116mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 7-speed, 12 - 28 teeth |
| Chain | Shimano CN-UG50, 1/2 x 3/32" |
| Pedals | Victor VP-933S w/clips & straps |
Brakes
| Brakes | Chang Star VB-911 K brakes, Chang Star VL-294DT front/Chang Star VL-294 DT rear levers |
|---|
Cockpit & Contact Points
| Headset | 1" YST steel |
|---|---|
| Handlebar | LCH 682 |
| Stem | LVC-LCH 739N |
| Saddle | Velo 263 B15 |
| Seatpost | Tahoma DP 310 |
Wheels & Tires
| Hubs | Front: KN 100FQ, Rear: FH-RM40 |
|---|---|
| Rims | Rigida AS-26, 36-hole |
| Spokes | Sapim stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 38c Kenda K-180 |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
top-pull
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 38c Kenda K-180
- Drivetrain
- 7-speed
- Bottom bracket / shell
- TE-BB-92, 116mm spindle · 68mm English
Equipment inspection checks 11 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: RST 801, 1.6" travel · Aluminum/chromoly, unicrown crown
Suspension
Evaluate the suspension →Archived: Fork: RST 801, 1.6" travel
Drivetrain
Check drivetrain wear →Archived: Group: Hybrid Mix · Front derailleur: Shimano Alivio top-swing, top-pull · Rear derailleur: Shimano AceraX · Crankset: CYC-AL344 SQS, 24/34/42 teeth · Bottom bracket: TE-BB-92, 116mm spindle · Rear cogs: 7-speed, 12 - 28 teeth · Chain: Shimano CN-UG50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Chang Star VB-911 K brakes, Chang Star VL-294DT front/Chang Star VL-294 DT rear levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Rigida AS-26, 36-hole · Hubs: Front: KN 100FQ, Rear: FH-RM40 · Front tire: 700 x 38c Kenda K-180
Controls and contact points
Archived: Headset: 1" YST steel · Handlebar: LCH 682 · Stem: LVC-LCH 739N · Seatpost: Tahoma DP 310 · Saddle: Velo 263 B15 · Pedals: Victor VP-933S w/clips & straps
Have you owned this model?Help document firsthand fit, ride and maintenance details that may no longer be available.
This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.

