Uses front tire 26×2.1; rear size isn’t listed.
Velopedia Bicycle Archive
2000 Norco Katmandu
Original specifications: Shimano Tourney TY-40 drivetrain · 26" wheels · legacy reference geometry.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #48440- Model year
- 2000
- Category
- Mountain
- Original MSRP
- $249.00
- Sizes
- 14", 16", 18", 20", 22"
- Colors
- Black, Gold/Black
- Geometry
- Legacy reference
- In this record
- 25 specifications · original MSRP · geometry
Model history 18 other years
Browse other years
Compare side by side
Identification clues
2000 archived details
- Published colors
- Black, Gold/Black
- Frame
- Chromoly
- Original equipment
- Shimano Tourney TY-40
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildChromoly · Shimano Tourney TY-40 · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Chromoly |
| Fork | RST-156, 2.0" travel |
| Fork Material | Aluminum, triple-clamp crown |
Drivetrain
| Component Group | Shimano Tourney TY-40 |
|---|---|
| Shifters | SRAM MRX Classic |
| Front Derailleur | Shimano Tourney TY-30, bottom-pull |
| Rear Derailleur | Shimano Tourney TY-22 |
| Crankset | ProWheel Alloy, 28/38/48 teeth |
| Bottom Bracket | Three piece, sealed |
| Rear Cogs | 7-speed, 14 - 28 teeth |
| Chain | KMC Z-51, 1/2 x 1/8" |
| Pedals | Victor VP-896 |
Brakes
| Brakes | Chang Star linear-pull brakes, Chang Star linear-pull levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless YST |
|---|---|
| Handlebar | Steel, rise |
| Handlebar Extensions | Not included |
| Stem | Steel |
| Saddle | Velo VL-2004 |
| Seatpost | Aluminum micro-adjust |
Wheels & Tires
| Hubs | Front: Joy Tech aluminum, Q/R, Rear: Joy Tech aluminum, nutted |
|---|---|
| Rims | Alex Y-2000, 36-hole |
| Spokes | UCP, 2.0mm straight gauge |
| Front Tire | 26 x 2.10" multi-terrain |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 5 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 563.9 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 424.2 mm |
| Wheelbase | 1064.3 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Chang Star linear-pull levers
More parts (3)Fewer parts
bottom-pull
36-hole
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 2.10" multi-terrain
- Drivetrain
- 7-speed
- Bottom bracket / shell
- Three piece, sealed
Equipment inspection checks 11 checks based on 6 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: RST-156, 2.0" travel · Aluminum, triple-clamp crown
Suspension
Evaluate the suspension →Archived: Fork: RST-156, 2.0" travel
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Tourney TY-40 · Shifters: SRAM MRX Classic · Front derailleur: Shimano Tourney TY-30, bottom-pull · Rear derailleur: Shimano Tourney TY-22 · Crankset: ProWheel Alloy, 28/38/48 teeth · Bottom bracket: Three piece, sealed · Rear cogs: 7-speed, 14 - 28 teeth · Chain: KMC Z-51, 1/2 x 1/8"
Brakes
Inspect the brakes →Archived: Brakes: Chang Star linear-pull brakes, Chang Star linear-pull levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Alex Y-2000, 36-hole · Hubs: Front: Joy Tech aluminum, Q/R, Rear: Joy Tech aluminum, nutted · Front tire: 26 x 2.10" multi-terrain
Controls and contact points
Archived: Headset: 1 1/8" threadless YST · Handlebar: Steel, rise · Stem: Steel · Seatpost: Aluminum micro-adjust · Saddle: Velo VL-2004 · Pedals: Victor VP-896
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.


