Rear tire: 26×2.1.
Velopedia Bicycle Archive
1996 Nishiki Backroads
Original specifications: Shimano STX drivetrain · 26" wheels · 27.5 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #59066- Model year
- 1996
- Category
- Mountain
- Original MSRP
- $419.99
- Sizes
- 16", 18", 20", 22"
- Colors
- Bright sand, Sequoia Coast Linear
- Weight
- 27.5 lb
- Geometry
- Legacy reference
- In this record
- 27 specifications · original MSRP · geometry
Model history 6 other years
Browse other years
Compare side by side
Identification clues
1996 archived details
- Published colors
- Bright sand, Sequoia Coast Linear
- Frame
- 7005 aluminum
- Original equipment
- Shimano STX
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build7005 aluminum · Shimano STX · 26" wheels
Frameset
| Frame Construction | Welded aluminum |
|---|---|
| Frame Material | 7005 aluminum |
| Fork | Nishiki |
| Fork Material | Chromoly, unicrown crown |
Drivetrain
| Component Group | Shimano STX |
|---|---|
| Shifters | Grip Shift MRX-100 |
| Front Derailleur | Shimano Alivio top-swing, top-pull/clamp-on 31.8 mm |
| Rear Derailleur | Shimano STX |
| Crankset | Tracer, 24/34/42 teeth |
| Bottom Bracket | Shimano BB-CT91, 116 mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 7-speed, 11 - 28 teeth |
| Chain | KMC UG-50, 1/2 x 3/32" |
| Pedals | Wellgo LU-943 w/clips & straps |
Brakes
| Brakes | Shimano Altus brakes, Lee Chi GS1 levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" Victor VP-H94 |
|---|---|
| Handlebar | Live Chin LCH-685A |
| Handlebar Extensions | Profitting AH-02 |
| Stem | Hsin Lung MTS 118 |
| Saddle | Sella Stratos HyperMTB |
| Seatpost | Lee Chi SP-204 alloy, 27.2 mm diameter |
Wheels & Tires
| Rims | Vuelta Strong, 36-hole |
|---|---|
| Spokes | Chung Nan stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 26 x 2.10" Kenda K-857 Hammer |
| Rear Tire | 26 x 2.10" Kenda K-867 Anvil |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 584.2 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 426.7 mm |
| Wheelbase | 1064.3 mm |
| Fork offset / rake | 44.5 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
27.2 mm diameter
More parts (3)Fewer parts
116 mm spindle
Based on the original build. Check fit and installed parts before ordering.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Front: 26 x 2.10" Kenda K-857 Hammer, Rear: 26 x 2.10" Kenda K-867 Anvil
- Drivetrain
- 7-speed
- Seatpost diameter
- 27.2 mm
- Bottom bracket / shell
- Shimano BB-CT91, 116 mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: Welded aluminum · Fork: Nishiki · Chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Shimano STX · Shifters: Grip Shift MRX-100 · Front derailleur: Shimano Alivio top-swing, top-pull/clamp-on 31.8 mm · Rear derailleur: Shimano STX · Crankset: Tracer, 24/34/42 teeth · Bottom bracket: Shimano BB-CT91, 116 mm spindle · Rear cogs: 7-speed, 11 - 28 teeth · Chain: KMC UG-50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano Altus brakes, Lee Chi GS1 levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Vuelta Strong, 36-hole · Front tire: Front: 26 x 2.10" Kenda K-857 Hammer, Rear: 26 x 2.10" Kenda K-867 Anvil
Controls and contact points
Archived: Headset: 1 1/8" Victor VP-H94 · Handlebar: Live Chin LCH-685A · Stem: Hsin Lung MTS 118 · Seatpost: Lee Chi SP-204 alloy, 27.2 mm diameter · Saddle: Sella Stratos HyperMTB · Pedals: Wellgo LU-943 w/clips & straps
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.