Velopedia Bicycle Archive

1993 Nashbar 5000HF

Original specifications: Shimano 400CX Rapidfire Plus drivetrain · 700c wheels · 27 lb published weight.

Share owner experience

Planning to sell? Draft your listing

No archive photo is available for this record.

At a glance

Archive #44952
Model year
1993
Category
Hybrid
Original MSRP
$539.00
Sizes
17, 18, 19, 21, 23, 23.75
Weight
27 lb
Geometry
Legacy reference
In this record
20 specifications · original MSRP · geometry
Campaign
Original buildTange steel · Shimano 400CX Rapidfire Plus · 700c wheels

Manufacturer catalog

Published sizes and colors

6 sizes

Manufacturer-published sizes and colors; availability and exact size/color pairings may vary by market or production run.

Published sizes

171819212323.75

Frameset

Frame ConstructionTIG-welded steel
Frame MaterialTange steel
ForkSpinner SPT-828X

Drivetrain

Component GroupShimano 400CX Rapidfire Plus
ShiftersShimano 400CX Rapidfire Plus
Front DerailleurShimano 400CX
Rear DerailleurShimano 400CX
CranksetShimano 400CX, 20/32/42 teeth
Rear Cogs7-speed, 11 - 19 teeth
ChainShimano CN-HG70
PedalsVictor VP-933A

Brakes

BrakesShimano 400CX brakes, levers

Cockpit & Contact Points

HandlebarHsin Lung MTB-AL110
StemGirvin Flexstem
SaddleVetta Lite Gel
SeatpostSakae CTS

Wheels & Tires

HubsShimano 400CX
RimsAraya PX-45, 32-hole
Front Tire700 x 35c Cheng Shin
Wheel Size700c wheels

Geometry

Legacy reference · 6 measurements

Historical measurements. Frame size unknown.

All geometry measurementsLegacy reference · 6 measurements
MeasurementLegacy reference
Top tube591.8 mm
Head-tube angle72°
Seat-tube angle72°
Chainstay / rear center431.8 mm
Wheelbase1041.4 mm
Fork offset / rake45.7 mm

Frame size not recorded.

Gearing

Lower gears help on climbs. Higher gears suit higher speeds.

RPM

RPM = pedal turns per minute.

All published sizes42/32/20T · 11–19T · 7-speed
Lowest1.05:1 Highest3.82:1 Total range363%
Estimated speed At 90 RPM Lowest gear7.7 mph Highest gear27.9 mph

Uses front tire 700C×35; rear size isn’t listed.

How it works

Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.

Speeds are estimates from tire size and pedal cadence. Actual speeds vary.

Try other gearing

Try your current gearingChanged tires or gears? Calculate your setup.

Your changes apply to this calculation. The archived build stays unchanged.

Your gearing setup
Gears

Use up to three front tooth counts, separated by /. For one rear sprocket, enter the same count twice.

Rear tire

Apply the marking on your rear tire or edit its dimensions below. Older or fractional inch sizes need the ISO marking (e.g. 37-590).

For 32-622, width is 32 mm and rim diameter is 622 mm. Use the rear tire on mixed-wheel bikes. Leave both fields empty to compare ratios only.

Gear, dimension and cadence changes update results automatically.

Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.

Parts & serviceability

Find replacement parts

Original specifications
Chain · Original
Shimano CN-HG70
Front tire · Original
700 x 35c Cheng Shin Replacement search: 700cx35 bicycle tire Before ordering: Check rim type and tire clearance.
Crankset · Original
Shimano 400CX

20/32/42 teeth

More parts (1)Fewer parts
Hubs · Original
Shimano 400CX

Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.

Parts and service referenceQuick reference before buying parts

Archived specifications for reference. Check the fitted parts before ordering.

Front tire
700 x 35c Cheng Shin
Drivetrain
7-speed
Campaign
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
0 of 10 checked Progress stays in this browser for this record.

Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.

Full used-bike inspection guide →

Archived: Frame: TIG-welded steel · Fork: Spinner SPT-828X

Archived: Group: Shimano 400CX Rapidfire Plus · Shifters: Shimano 400CX Rapidfire Plus · Front derailleur: Shimano 400CX · Rear derailleur: Shimano 400CX · Crankset: Shimano 400CX, 20/32/42 teeth · Rear cogs: 7-speed, 11 - 19 teeth · Chain: Shimano CN-HG70

Archived: Brakes: Shimano 400CX brakes, levers

Archived: Wheel size: 700c wheels · Rims: Araya PX-45, 32-hole · Hubs: Shimano 400CX · Front tire: 700 x 35c Cheng Shin

Controls and contact points

Archived: Handlebar: Hsin Lung MTB-AL110 · Stem: Girvin Flexstem · Seatpost: Sakae CTS · Saddle: Vetta Lite Gel · Pedals: Victor VP-933A

My Garage

Velopedia

Enter your email and Velopedia will send a private sign-in link. No password required.

Have you owned this model?Help preserve its real-world history by sharing your owner experience.

Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.

Add fit, maintenance and buyer detailsOptional · five additional fields

Your contribution goes directly to Velopedia’s private review queue. We’ll email an optional confirmation link plus a private edit and withdrawal link, but you do not need to confirm your email before an administrator can review or approve the submission.

Already contributed? Send me a fresh private edit link

For privacy, Velopedia shows the same confirmation whether or not an experience exists.

Checking current listings…

Find this bike on eBay

Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.

Campaign

Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.

Scroll to Top