Uses front tire 700C×35; rear size isn’t listed.
Velopedia Bicycle Archive
2003 Marin Kentfield
Original specifications: Shimano Altus · 7-speed · mechanical rear derailleur · 700c wheels · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #39263- Model year
- 2003
- Category
- City & Commuter
- Original MSRP
- $299.99
- Sizes
- 13.5", 15.5", 17.5", 19", 20.5", womens 15", womens 17"
- Colors
- Matte Navy
- Geometry
- Legacy reference
- In this record
- 24 specifications · archived image · original MSRP · geometry
Model history 12 other years
Browse other years
Compare side by side
Identification clues
2003 archived details
- Published colors
- Matte Navy
- Frame
- Chromoly main triangle/hi-tensile steel rear stays
- Original equipment
- Hybrid Mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildChromoly main triangle/hi-tensile steel rear stays · Hybrid Mix · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Chromoly main triangle/hi-tensile steel rear stays |
| Fork Material | Chromoly, unicrown crown |
Drivetrain
| Component Group | Hybrid Mix |
|---|---|
| Shifters | Shimano Acera |
| Front Derailleur | Shimano Tourney TY-30 |
| Rear Derailleur | Shimano Altus |
| Crankset | Shimano Tourney TY-30, 28/38/48 teeth |
| Bottom Bracket | Sealed cartridge |
| Rear Cogs | 7-speed, 13 - 34 teeth |
| Chain | Shimano CN-UG50, 1/2 x 3/32" |
| Pedals | Resin |
Brakes
| Brakes | Aluminum linear-pull brakes, Shimano Acera levers |
|---|
Cockpit & Contact Points
| Headset | 1" threaded sealed mechanism |
|---|---|
| Handlebar | Aluminum, 2" rise |
| Handlebar Extensions | Not included |
| Stem | Aluminum, forged |
| Saddle | Comfort |
| Seatpost | Aluminum, suspension |
Wheels & Tires
| Hubs | Aluminum, Q/R |
|---|---|
| Rims | Aluminum, 36-hole |
| Spokes | Stainless steel, 14ga. (2.0mm) straight gauge |
| Front Tire | 700 x 35c City |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 5 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 552.4 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 439.4 mm |
| Wheelbase | 1057.3 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Shimano Acera levers
More parts (4)Fewer parts
28/38/48 teeth
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 35c City
- Drivetrain
- 7-speed
- Bottom bracket / shell
- Sealed cartridge
Equipment inspection checks 9 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: · Chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Hybrid Mix · Shifters: Shimano Acera · Front derailleur: Shimano Tourney TY-30 · Rear derailleur: Shimano Altus · Crankset: Shimano Tourney TY-30, 28/38/48 teeth · Bottom bracket: Sealed cartridge · Rear cogs: 7-speed, 13 - 34 teeth · Chain: Shimano CN-UG50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Aluminum linear-pull brakes, Shimano Acera levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Aluminum, 36-hole · Hubs: Aluminum, Q/R · Front tire: 700 x 35c City
Controls and contact points
Archived: Headset: 1" threaded sealed mechanism · Handlebar: Aluminum, 2" rise · Stem: Aluminum, forged · Seatpost: Aluminum, suspension · Saddle: Comfort · Pedals: Resin
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.





