Velopedia Bicycle Archive
2002 Marin Medavac
Original specifications: 20" wheels · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #37736- Model year
- 2002
- Category
- BMX
- Original MSRP
- $439.99
- Sizes
- Jump/Trail
- Colors
- Matte Gray
- Geometry
- Legacy reference
- In this record
- 22 specifications · archived image · original MSRP · geometry
Model history 1 other year
Browse other years
Compare side by side
Identification clues
2002 archived details
- Published colors
- Matte Gray
- Frame
- 4130 chromoly
- Original equipment
- N/A
Clues, not proof of model year. Colors vary and components may have been replaced.
Original build4130 chromoly · 20" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | 4130 chromoly |
| Fork | Marin |
| Fork Material | 4130 chromoly, unicrown crown |
Drivetrain
| Crankset | FSA The Pig 3-piece, 44 teeth |
|---|---|
| Bottom Bracket | Loose ball |
| BB Shell Width | American |
| Rear Cogs | 1-speed, 16 teeth |
| Chain | KMC, 1/2 x 3/32" |
| Pedals | Platform |
Brakes
| Brakes | Dia-Compe 990 brakes, Dia-Compe Tech 99 levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless FSA The Pig/SST Oryg detangler |
|---|---|
| Handlebar | Chromoly 4 piece |
| Stem | Aluminum, forged |
| Saddle | Padded BMX |
| Seatpost | Aluminum micro-adjust, 26.0mm diameter |
Wheels & Tires
| Hubs | Aluminum |
|---|---|
| Rims | Alex Supra Alpha, 48-hole |
| Spokes | Stainless steel, 14ga. (2.0mm) straight gauge |
| Front Tire | 20 x 2.00" Maxxis Max Daddy |
| Rear Tire | 20 x 1.75" Maxxis Max Daddy |
| Wheel Size | 20" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 4 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 520.7 mm |
| Head-tube angle | 73.5° |
| Seat-tube angle | 71.5° |
| Chainstay / rear center | 381 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
Speed unavailable: wheel or tire size is missing or unclear.
Add your rear tire size to calculate speedHow it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
44 teeth
More parts (2)Fewer parts
26.0mm diameter
48-hole
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Front: 20 x 2.00" Maxxis Max Daddy, Rear: 20 x 1.75" Maxxis Max Daddy
- Drivetrain
- 1-speed
- Seatpost diameter
- 26 mm
- Bottom bracket / shell
- Loose ball · American
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Marin · 4130 chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Crankset: FSA The Pig 3-piece, 44 teeth · Bottom bracket: Loose ball · Rear cogs: 1-speed, 16 teeth · Chain: KMC, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Dia-Compe 990 brakes, Dia-Compe Tech 99 levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 20" wheels · Rims: Alex Supra Alpha, 48-hole · Hubs: Aluminum · Front tire: Front: 20 x 2.00" Maxxis Max Daddy, Rear: 20 x 1.75" Maxxis Max Daddy
Controls and contact points
Archived: Headset: 1 1/8" threadless FSA The Pig/SST Oryg detangler · Handlebar: Chromoly 4 piece · Stem: Aluminum, forged · Seatpost: Aluminum micro-adjust, 26.0mm diameter · Saddle: Padded BMX · Pedals: Platform
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.





