Uses front tire 700C×23; rear size isn’t listed.
Velopedia Bicycle Archive
2000 Marin Verona
Original specifications: Campagnolo Mirage Triple drivetrain · 700c wheels · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #46221- Model year
- 2000
- Category
- Road
- Original MSRP
- $1,123.00
- Sizes
- 48cm, 51cm, 53cm, 55cm, 57cm, 59cm, 61cm
- Colors
- Silver w/Blue
- Geometry
- Legacy reference
- In this record
- 25 specifications · archived image · original MSRP · geometry
Model history 11 other years
Browse other years
Compare side by side
Identification clues
2000 archived details
- Published colors
- Silver w/Blue
- Frame
- Columbus Thron
- Original equipment
- Campagnolo Mirage Triple
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildColumbus Thron · Campagnolo Mirage Triple · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Columbus Thron |
| Fork | Marin |
| Fork Material | Columbus Thron, aero crown |
Drivetrain
| Component Group | Campagnolo Mirage Triple |
|---|---|
| Shifters | Campagnolo Mirage Ergo |
| Front Derailleur | Campagnolo Mirage |
| Rear Derailleur | Campagnolo Mirage |
| Crankset | Campagnolo Veloce, 30/42/52 teeth |
| Bottom Bracket | Campagnolo Mirage |
| Rear Cogs | 9-speed, 13 - 26 teeth |
| Chain | Campagnolo Daytona, 1/2 x 3/32" |
| Pedals | Not included |
Brakes
| Brakes | Campagnolo Veloce dual pivot brakes, Campagnolo Mirage levers |
|---|
Cockpit & Contact Points
| Headset | Aluminum |
|---|---|
| Handlebar | Cinelli Touch-E |
| Handlebar Extensions | Not included |
| Stem | Cinelli X/E |
| Saddle | Selle Italia Trimatic |
| Seatpost | Alloy, 27.2mm diameter |
Wheels & Tires
| Hubs | Campagnolo Mirage |
|---|---|
| Rims | Ambrosia Balance, 32-hole |
| Spokes | DT stainless steel, 1.8mm |
| Front Tire | 700 x 23c Vittoria Action |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 5 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 564.9 mm |
| Head-tube angle | 73° |
| Seat-tube angle | 73.5° |
| Chainstay / rear center | 415.8 mm |
| Fork offset / rake | 45.7 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts

Vittoria Rubino Pro G2.0 Clincher Tire Black, 700x23
700x23c
Replacement option
27.2mm diameter

Race Face Ride XC Seatpost Black, 27.2x375mm
Replacement option
More parts (3)Fewer parts
30/42/52 teeth
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 23c Vittoria Action
- Drivetrain
- 9-speed
- Seatpost diameter
- 27.2 mm
- Bottom bracket / shell
- Campagnolo Mirage
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: Marin · Columbus Thron, aero crown
Drivetrain
Check drivetrain wear →Archived: Group: Campagnolo Mirage Triple · Shifters: Campagnolo Mirage Ergo · Front derailleur: Campagnolo Mirage · Rear derailleur: Campagnolo Mirage · Crankset: Campagnolo Veloce, 30/42/52 teeth · Bottom bracket: Campagnolo Mirage · Rear cogs: 9-speed, 13 - 26 teeth · Chain: Campagnolo Daytona, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Campagnolo Veloce dual pivot brakes, Campagnolo Mirage levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Ambrosia Balance, 32-hole · Hubs: Campagnolo Mirage · Front tire: 700 x 23c Vittoria Action
Controls and contact points
Archived: Headset: Aluminum · Handlebar: Cinelli Touch-E · Stem: Cinelli X/E · Seatpost: Alloy, 27.2mm diameter · Saddle: Selle Italia Trimatic · Pedals: Not included
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.



