Rear tire: 26×2.1.
Velopedia Bicycle Archive
1995 Marin Bear Valley S.E.
Original specifications: Shimano STX-RC drivetrain · 26" wheels · 24.5 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #32407- Model year
- 1995
- Category
- Mountain
- Original MSRP
- $659.00
- Sizes
- 14", 15.5", 17.5", 19", 20.5", womens 17.5"
- Colors
- Gun metal
- Weight
- 24.5 lb
- Geometry
- Legacy reference
- In this record
- 26 specifications · original MSRP · geometry
Model history 1 other year
Browse other years
Compare side by side
Identification clues
1995 archived details
- Published colors
- Gun metal
- Frame
- Tange chromoly, double-butted
- Original equipment
- Shimano STX-RC
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildTange chromoly, double-butted · Shimano STX-RC · 26" wheels
Frameset
| Frame Construction | TIG-welded steel |
|---|---|
| Frame Material | Tange chromoly, double-butted |
| Fork | Marin Lite |
| Fork Material | Chromoly, butted, unicrown crown |
Drivetrain
| Component Group | Shimano STX-RC |
|---|---|
| Shifters | Grip Shift SRT-600 |
| Front Derailleur | Shimano STX-RC, bottom-pull/clamp-on 28.6 mm |
| Rear Derailleur | Shimano STX-RC |
| Crankset | Shimano STX-RC, 22/32/42 teeth |
| Rear Cogs | 7-speed, 11 - 28 teeth |
| Chain | Shimano CN-IG50, 1/2 x 3/32" |
| Pedals | Victor MTB, alloy cage w/clips & straps |
Brakes
| Brakes | Marin Lite brakes, Dia-Compe PC-7 levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" Marin Lite |
|---|---|
| Handlebar | Marin Lite alloy |
| Handlebar Extensions | Marin Lite |
| Stem | Marin Lite alloy |
| Saddle | Marin Lite |
| Seatpost | Kalloy SP-248, 27.0 mm diameter |
Wheels & Tires
| Hubs | Shimano STX-RC |
|---|---|
| Rims | Mavic M400, 32-hole |
| Spokes | Stainless steel, 1.8 mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 26 x 2.10" Marin Quake 7.0 |
| Rear Tire | 26 x 2.10" Marin Quake 7.1 |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 5 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 571.5 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 74° |
| Chainstay / rear center | 425.4 mm |
| Fork offset / rake | 45 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
22/32/42 teeth
More parts (4)Fewer parts
27.0 mm diameter
32-hole
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Front: 26 x 2.10" Marin Quake 7.0, Rear: 26 x 2.10" Marin Quake 7.1
- Drivetrain
- 7-speed
- Seatpost diameter
- 27 mm
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded steel · Fork: Marin Lite · Chromoly, butted, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Shimano STX-RC · Shifters: Grip Shift SRT-600 · Front derailleur: Shimano STX-RC, bottom-pull/clamp-on 28.6 mm · Rear derailleur: Shimano STX-RC · Crankset: Shimano STX-RC, 22/32/42 teeth · Rear cogs: 7-speed, 11 - 28 teeth · Chain: Shimano CN-IG50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Marin Lite brakes, Dia-Compe PC-7 levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Mavic M400, 32-hole · Hubs: Shimano STX-RC · Front tire: Front: 26 x 2.10" Marin Quake 7.0, Rear: 26 x 2.10" Marin Quake 7.1
Controls and contact points
Archived: Headset: 1 1/8" Marin Lite · Handlebar: Marin Lite alloy · Stem: Marin Lite alloy · Seatpost: Kalloy SP-248, 27.0 mm diameter · Saddle: Marin Lite · Pedals: Victor MTB, alloy cage w/clips & straps
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.