Lowest0.94:1
Highest4.36:1
Total range464%
Estimated speed At 90 RPM
Lowest gear
Highest gear
Rear tire: 700C×38.
Velopedia Bicycle Archive
2021 Liv Devote 2
Original specifications: geometry for 4 published sizes.
Planning to sell? Draft your listing
At a glance
Archive #900003063- Model year
- 2021
- Category
- Gravel & Cyclocross
- Original MSRP
- $1,450.00
- Sizes
- XS, S, M, L
- Colors
- Eclipse
- Geometry
- 4 manufacturer sizes
- In this record
- 21 specifications · archived image · original MSRP · geometry
Original buildAluminum
Frameset
| Frame Construction | ALUXX Grade Aluminum |
|---|---|
| Frame Material | Aluminum |
| Fork | full composite, OverDrive steerer, disc |
| Fork Material | Carbon Fiber |
Drivetrain
| Shifters | Shimano Sora |
|---|---|
| Front Derailleur | Shimano Sora |
| Rear Derailleur | Shimano Sora |
| Crankset | FSA Vero Pro, 32/48 |
| Bottom Bracket | Sealed Cartridge, Threaded |
| Cassette | Shimano CH-HG400, 11x34 |
| Chain | KMC X9 with Missing Link |
Brakes
| Brakes | Tektro MD-C550 |
|---|
Cockpit & Contact Points
| Handlebar | Giant Contact XR Ergo-Control, 31.8 |
|---|---|
| Stem | Giant Sport |
| Saddle | Liv Approach |
| Seatpost | Giant D-Fuse, alloy |
Wheels & Tires
| Hubs | Giant S-X2 Disc wheelset |
|---|---|
| Rims | Giant S-X2 Disc wheelset |
| Spokes | Giant S-X2 Disc wheelset |
| Front Tire | Giant CrossCut AT 2, 700x38c, tubeless |
| Rear Tire | Giant CrossCut AT 2, 700x38c, tubeless |
No specifications match. Try a component name or clear your search.
Geometry
Frame measurements by size.
Frame diagram
Size
Measurement
Measurement
—
Select an available measurement to locate it on the frame.
All geometry measurements4 sizes · 17 measurements
| Measurement | XS | S | M | L |
|---|---|---|---|---|
| Seat tube | 390 mm | 420 mm | 465 mm | 500 mm |
| Top tube | 515 mm | 525 mm | 535 mm | 550 mm |
| Head tube | 95 mm | 125 mm | 155 mm | 180 mm |
| Head-tube angle | 70.5° | 70.5° | 71° | 71° |
| Seat-tube angle | 75° | 75° | 74.5° | 74.5° |
| Chainstay / rear center | 430 mm | 430 mm | 430 mm | 430 mm |
| Wheelbase | 1013 mm | 1020 mm | 1022 mm | 1039 mm |
| Bottom-bracket drop | 80 mm | 80 mm | 80 mm | 80 mm |
| Reach | 378 mm | 376 mm | 372 mm | 380 mm |
| Stack | 530 mm | 558 mm | 588 mm | 612 mm |
| Standover height | 678 mm | 706 mm | 744 mm | 774 mm |
| Fork offset / rake | 50 mm | 50 mm | 50 mm | 50 mm |
| Trail | 75.9 mm | 75.9 mm | 72.5 mm | 72.5 mm |
| Crank length | 165 mm | 170 mm | 172.5 mm | 172.5 mm |
| Stem length | 70 mm | 80 mm | 90 mm | 90 mm |
| Handlebar width | 400 mm | 400 mm | 420 mm | 420 mm |
| Wheel size | 700c | 700c | 700c | 700c |
Dimensions as recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Shimano CH-HG400
11x34
Giant CrossCut AT 2
700x38c, tubeless
Replacement search: 700cx38 bicycle tire Before ordering: Check rim type and tire clearance.More parts (5)Fewer parts
Tektro MD-C550
FSA Vero Pro, 32/48
165 mm
Frame sizes XS
170 mm
Frame sizes S
172.5 mm
Frame sizes M / L
Shimano Sora
Shimano Sora
Shimano Sora
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Giant CrossCut AT 2, 700x38c, tubeless
- Rear tire
- Giant CrossCut AT 2, 700x38c, tubeless
- Bottom bracket / shell
- Sealed Cartridge, Threaded
Equipment inspection checks 11 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: ALUXX Grade Aluminum · Fork: full composite, OverDrive steerer, disc · Carbon Fiber
Drivetrain
Check drivetrain wear →Archived: Shifters: Shimano Sora · Front derailleur: Shimano Sora · Rear derailleur: Shimano Sora · Crankset: FSA Vero Pro, 32/48 · Bottom bracket: Sealed Cartridge, Threaded · Cassette: Shimano CH-HG400, 11x34 · Chain: KMC X9 with Missing Link
Brakes
Inspect the brakes →Archived: Brakes: Tektro MD-C550
Wheels and tires
Check wheels and tires →Archived: Rims: Giant S-X2 Disc wheelset · Hubs: Giant S-X2 Disc wheelset · Front tire: Giant CrossCut AT 2, 700x38c, tubeless · Rear tire: Giant CrossCut AT 2, 700x38c, tubeless
Controls and contact points
Archived: Handlebar: Giant Contact XR Ergo-Control, 31.8 · Stem: Giant Sport · Seatpost: Giant D-Fuse, alloy · Saddle: Liv Approach
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.