Velopedia Bicycle Archive
2020 Kona Honzo CR
Original manufacturer specifications including 29" wheels, geometry for 4 published sizes.
Selling this bike? Create a shareable bike record
What Velopedia knows
- Model year
- 2020
- Category
- Mountain
- Sizes
- S, M, L, XL
- Geometry
- 4 manufacturer sizes · Geometry context
- Record coverage
- 3 preserved details · archived image · preserved geometry
- Archive ID
- 900002322
Frameset
| Frame Construction | Kona Carbon Trail |
|---|---|
| Frame Material | Carbon Fiber |
Wheels & Tires
| Wheel Size | 29" |
|---|
Size-specific frame data
Geometry
Manufacturer-published geometry normalized for consistent archival comparison. Effective top tube and reach remain separate measurements because they describe different aspects of fit.
| Measurement | S | M | L | XL |
|---|---|---|---|---|
| Seat tube | 370 mm | 420 mm | 470 mm | 530 mm |
| Top tube | 594 mm | 620 mm | 647 mm | 657 mm |
| Head tube | 95 mm | 100 mm | 105 mm | 110 mm |
| Head-tube angle | 68° | 68° | 68° | 68° |
| Seat-tube angle | 75° | 75° | 75° | 75° |
| Chainstay / rear center | 415 mm | 415 mm | 415 mm | 415 mm |
| Wheelbase | 1116 mm | 1143 mm | 1170 mm | 1182 mm |
| Bottom-bracket drop | 65 mm | 65 mm | 65 mm | 65 mm |
| Bottom-bracket height | 310 mm | 310 mm | 310 mm | 310 mm |
| Reach | 425 mm | 450 mm | 475 mm | 485 mm |
| Stack | 631 mm | 636 mm | 640 mm | 645 mm |
| Standover height | 730 mm | 730 mm | 740 mm | 760 mm |
| Fork offset / rake | 51 mm | 51 mm | 51 mm | 51 mm |
| Front center | 709 mm | 736 mm | 763 mm | 772 mm |
| Fork length / axle-to-crown | 531 mm | 531 mm | 531 mm | 531 mm |
Geometry source: Kona first-party archive metric geometry table ↗ Measurements can vary by configuration, wheel size, or flip-chip position where noted by the manufacturer.
Geometry tools
Analyze a published size
S geometry
Archive context: The chainstay of 415 mm sits toward the shorter rear-center end. Its bottom-bracket drop of 65 mm sits toward the deeper-drop end. Its stack of 631 mm sits toward the taller end.
Compared with 90 distinct mountain geometries in the Small-equivalent size cohort from model years 2018–2022 in the Velopedia archive.M geometry
Archive context: The chainstay of 415 mm sits toward the shorter rear-center end. Its bottom-bracket drop of 65 mm sits toward the deeper-drop end. Its stack of 636 mm sits toward the taller end.
Compared with 92 distinct mountain geometries in the Medium-equivalent size cohort from model years 2018–2022 in the Velopedia archive.L geometry
Archive context: The chainstay of 415 mm sits toward the shorter rear-center end. Its bottom-bracket drop of 65 mm sits toward the deeper-drop end. Its stack of 640 mm sits toward the taller end.
Compared with 89 distinct mountain geometries in the Large-equivalent size cohort from model years 2018–2022 in the Velopedia archive.XL geometry
Archive context: The chainstay of 415 mm sits toward the shorter rear-center end. Its bottom-bracket drop of 65 mm sits toward the deeper-drop end. Its wheelbase of 1182 mm sits toward the shorter end.
Compared with 78 distinct mountain geometries in the XL-equivalent size cohort from model years 2018–2022 in the Velopedia archive.Used-frameset inspection
If you’re buying this frameset used
Before buying: confirm the serial number and exact model, inspect frame and fork alignment, and inventory every included axle, hanger, clamp, headset part, cable guide and proprietary fitting.
Inspect the frame and fork →- FrameInspect the frame in bright light, especially around the head tube, bottom bracket, chainstays and clamped areas. Look for cracks, ripples, crushed sections or signs of a previous impact.Inspect the frame and fork →
- Included hardwareInventory every axle, hanger, clamp, headset part, cable guide, frame plug and proprietary fitting included with the frameset. Confirm replacement availability before treating a missing small part as insignificant.
- AlignmentSight along the frame and fork from several directions. Confirm that the fork, rear dropouts, head tube and other visible interfaces appear straight; professional measurement is appropriate when alignment cannot be established visually.
Used-frameset inspection checklist 13 universal checks for a record with limited component data Open checklistClose checklist
The archived record does not contain enough component detail for a fully specification-informed frameset checklist. Use these universal checks on the frameset in front of you, inventory every included part and confirm exact interfaces before choosing components.
Identity and fit
Follow the full used-bike inspection order →Archived: 2020 Kona Honzo CR · Frame/Frameset · Published sizes: S, M, L, XL
Frame and fork
Inspect the frame and fork →Archived: Frame: Kona Carbon Trail
Alignment
Inspect the frame and fork →Frame interfaces
Inspect the bottom bracket and shell →Before accepting the frameset
Inspect the frame and fork →Build relationships are limited to the archived manufacturer specifications. Confirm exact fit and standards before ordering parts or performing service.
Have you owned this bike?Help document firsthand fit, ride and maintenance details that may no longer be available.
This archive record has limited published detail. Share what would help another rider understand how this model fit, rode and held up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Current market
Snapshot not yet availableProtected live updateReady after page interactionAutomated crawlers do not trigger marketplace requests.
Move, scroll, tap or type to start the protected update.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.