- Frame
- Chromoly, butted
- Brakes
- Chang Star 875A brakes, Kona Race Light High Command levers
Same brand and year
Velopedia Bicycle Archive
1996 Kona A' Ha
Original specifications: Shimano Nexus drivetrain · 26" wheels · 26.5 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #53202- Model year
- 1996
- Category
- Cruiser
- Original MSRP
- $599.00
- Sizes
- 16", 18", 20"
- Colors
- Orange, Satin
- Weight
- 26.5 lb
- Geometry
- Legacy reference
- In this record
- 24 specifications · original MSRP · geometry
Original buildChromoly, butted · Shimano Nexus · 26" wheels
Frameset
| Frame Construction | Welded steel |
|---|---|
| Frame Material | Chromoly, butted |
| Fork | Kona Project Two Sport |
| Fork Material | Chromoly, unicrown crown |
Drivetrain
| Component Group | Shimano Nexus |
|---|---|
| Shifters | Shimano Inter-7 ST-7S20 |
| Crankset | CPI 3-piece, 40 teeth |
| Bottom Bracket | Shimano BB-LP26, 110 mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 7-speed internal, 18 teeth |
| Chain | Shimano CN-UG50, 1/2 x 3/32" |
| Pedals | Fasten LXT |
Brakes
| Brakes | Chang Star 875A brakes, Kona Race Light High Command levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" YST Sealed Tech |
|---|---|
| Handlebar | Steel |
| Stem | Alloy |
| Saddle | Kona Race Light |
| Seatpost | Kalloy alloy, 27.0 mm diameter |
Wheels & Tires
| Rims | Sun No.5, 32-hole |
|---|---|
| Spokes | Stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 26 x 2.10" Kona Sniff |
| Rear Tire | 26 x 2.10" Kona Scratch |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Size
Measurement
Measurement
—
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 596.9 mm |
| Head-tube angle | 70.5° |
| Seat-tube angle | 72° |
| Chainstay / rear center | 454.7 mm |
| Wheelbase | 1094.7 mm |
| Fork offset / rake | 44.2 mm |
Frame size not recorded.
Gearing
Original gearing is incomplete. Enter your setup to calculate ratios and cadence speeds.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
26 x 2.10" Kona Sniff
Replacement search: 26x2.1 bicycle tire Before ordering: Check rim type and tire clearance.
Shimano BB-LP26
110 mm spindle
More parts (2)Fewer parts
Shimano Inter-7 ST-7S20
Kalloy alloy
27.0 mm diameter
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- Front: 26 x 2.10" Kona Sniff, Rear: 26 x 2.10" Kona Scratch
- Drivetrain
- 7-speed
- Seatpost diameter
- 27 mm
- Bottom bracket / shell
- Shimano BB-LP26, 110 mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: Welded steel · Fork: Kona Project Two Sport · Chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Nexus · Shifters: Shimano Inter-7 ST-7S20 · Crankset: CPI 3-piece, 40 teeth · Bottom bracket: Shimano BB-LP26, 110 mm spindle · Rear cogs: 7-speed internal, 18 teeth · Chain: Shimano CN-UG50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Chang Star 875A brakes, Kona Race Light High Command levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Sun No.5, 32-hole · Front tire: Front: 26 x 2.10" Kona Sniff, Rear: 26 x 2.10" Kona Scratch
Controls and contact points
Archived: Headset: 1 1/8" YST Sealed Tech · Handlebar: Steel · Stem: Alloy · Seatpost: Kalloy alloy, 27.0 mm diameter · Saddle: Kona Race Light · Pedals: Fasten LXT
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.