Uses front tire 700C×23; rear size isn’t listed.
Velopedia Bicycle Archive
2003 KHS Flite 100
Original specifications: Track mix drivetrain · 700c wheels · 19.3 lb published weight.
Planning to sell? Draft your listing
At a glance
Archive #38864- Model year
- 2003
- Category
- Track
- Original MSRP
- $659.00
- Sizes
- 50cm, 53cm, 57cm, 60cm
- Colors
- Yellow
- Weight
- 19.3 lb
- Geometry
- Legacy reference
- In this record
- 23 specifications · archived image · original MSRP · geometry
Model history 10 other years
Browse other years
Compare side by side
Identification clues
2003 archived details
- Published colors
- Yellow
- Frame
- Reynolds 520
- Original equipment
- Track mix
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildReynolds 520 · Track mix · 700c wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Reynolds 520 |
| Fork | Khs |
| Fork Material | Chromoly, semi-sloping crown |
Drivetrain
| Component Group | Track mix |
|---|---|
| Crankset | Sugino SG-75, 48 teeth |
| Bottom Bracket | Sealed cartridge |
| BB Shell Width | 68mm English |
| Rear Cogs | 1-speed, 16 teeth |
| Chain | KMC Z30, 1/2 x 1/8" |
| Pedals | Aluminum w/clips & straps |
Cockpit & Contact Points
| Headset | 1" Tien Hsin 3600 |
|---|---|
| Handlebar | Aluminum drop bar |
| Handlebar Extensions | Not included |
| Stem | Hsin Lung aluminum |
| Saddle | KHS Padded |
| Seatpost | Aluminum micro-adjust |
Wheels & Tires
| Hubs | Aluminum, nutted |
|---|---|
| Rims | Aluminum, 36-hole |
| Spokes | Stainless steel, 14ga. (2.0mm) straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 700 x 23c KHS |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 550 mm |
| Head-tube angle | 74° |
| Seat-tube angle | 74° |
| Chainstay / rear center | 425 mm |
| Wheelbase | 981 mm |
| Fork offset / rake | 22 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
1/2 x 1/8"
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 23c KHS
- Drivetrain
- 1-speed
- Bottom bracket / shell
- Sealed cartridge · 68mm English
Equipment inspection checks 9 checks based on 4 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: KHS · Chromoly, semi-sloping crown
Drivetrain
Check drivetrain wear →Archived: Group: Track mix · Crankset: Sugino SG-75, 48 teeth · Bottom bracket: Sealed cartridge · Rear cogs: 1-speed, 16 teeth · Chain: KMC Z30, 1/2 x 1/8"
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Aluminum, 36-hole · Hubs: Aluminum, nutted · Front tire: 700 x 23c KHS
Controls and contact points
Archived: Headset: 1" Tien Hsin 3600 · Handlebar: Aluminum drop bar · Stem: Hsin Lung aluminum · Seatpost: Aluminum micro-adjust · Saddle: KHS Padded · Pedals: Aluminum w/clips & straps
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.





