Uses front tire 26×1.5; rear size isn’t listed.
Velopedia Bicycle Archive
1997 KHS Tandemania Comp
Original specifications: Shimano Deore XT/LX drivetrain · 26" wheels · 41.6 lb published weight.
Planning to sell? Draft your listing
At a glance
Archive #65121- Model year
- 1997
- Category
- Tandem
- Original MSRP
- $1,190.00
- Sizes
- Captain 18"/stoker 16", captain 20"/stoker 18"
- Colors
- Brilliant blue
- Weight
- 41.6 lb
- Geometry
- Legacy reference
- In this record
- 27 specifications · archived image · original MSRP · geometry
Model history 10 other years
Browse other years
Compare side by side
Identification clues
1997 archived details
- Published colors
- Brilliant blue
- Frame
- True Temper chromoly
- Original equipment
- Shimano Deore XT/LX
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildTrue Temper chromoly · Shimano Deore XT/LX · 26" wheels
Frameset
| Frame Construction | Welded |
|---|---|
| Frame Material | True Temper chromoly |
| Fork | Khs |
| Fork Material | Chromoly, unicrown crown |
Drivetrain
| Component Group | Shimano Deore XT/LX |
|---|---|
| Shifters | Sachs Wavey |
| Front Derailleur | Shimano Deore LX top-swing, bottom-pull/clamp-on 31.8 mm |
| Rear Derailleur | Shimano Deore XT SGS |
| Crankset | Sugino Fuse Tandem, 28/44/54 teeth |
| Bottom Bracket | Shimano BB-UN52, Eccentric |
| BB Shell Width | 68mm English |
| Rear Cogs | 7-speed, 13 - 28 teeth |
| Chain | Shimano CN-HG50, 1/2 x 3/32" |
| Pedals | Aluminum |
Brakes
| Brakes | Dia-Compe VC-747 brakes, Dia-Compe PC-7 EXA levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" Tien Hsin TH-860 |
|---|---|
| Handlebar | Aluminum |
| Handlebar Extensions | Not included |
| Stem | Aluminum |
| Saddle | Selle San Marco Tecno Dynamica |
| Seatpost | Polygon/rear suspension, 26.0 mm diameter |
Wheels & Tires
| Hubs | Front: aluminum quick release, Rear: aluminum nutted |
|---|---|
| Rims | Sun Rims Rhyno, 40-hole |
| Spokes | Wheelsmith stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 26 x 1.50" Duro HF-105 |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 582 mm |
| Head-tube angle | 74° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 440 mm |
| Wheelbase | 1789 mm |
| Fork offset / rake | 54 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Eccentric
More parts (1)Fewer parts
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 1.50" Duro HF-105
- Drivetrain
- 7-speed
- Bottom bracket / shell
- Shimano BB-UN52, Eccentric · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: Welded · Fork: KHS · Chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Deore XT/LX · Shifters: Sachs Wavey · Front derailleur: Shimano Deore LX top-swing, bottom-pull/clamp-on 31.8 mm · Rear derailleur: Shimano Deore XT SGS · Crankset: Sugino Fuse Tandem, 28/44/54 teeth · Bottom bracket: Shimano BB-UN52, Eccentric · Rear cogs: 7-speed, 13 - 28 teeth · Chain: Shimano CN-HG50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Dia-Compe VC-747 brakes, Dia-Compe PC-7 EXA levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Sun Rims Rhyno, 40-hole · Hubs: Front: aluminum quick release, Rear: aluminum nutted · Front tire: 26 x 1.50" Duro HF-105
Controls and contact points
Archived: Headset: 1 1/8" Tien Hsin TH-860 · Handlebar: Aluminum · Stem: Aluminum · Seatpost: Polygon/rear suspension, 26.0 mm diameter · Saddle: Selle San Marco Tecno Dynamica · Pedals: Aluminum
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.


