Uses front tire 26×1.95; rear size isn’t listed.
Velopedia Bicycle Archive
1997 KHS Brentwood
Original specifications: Shimano Altus/Tourney TY-22 drivetrain · 26" wheels · 31 lb published weight.
Planning to sell? Draft your listing
At a glance
Archive #61758- Model year
- 1997
- Category
- Cruiser
- Original MSRP
- $329.00
- Sizes
- 17"
- Colors
- Ivory/cabernet
- Weight
- 31 lb
- Geometry
- Legacy reference
- In this record
- 26 specifications · archived image · original MSRP · geometry
Model history 9 other years
Browse other years
Compare side by side
Identification clues
1997 archived details
- Published colors
- Ivory/cabernet
- Frame
- Chromoly/hi-tensile steel
- Original equipment
- Shimano Altus/Tourney TY-22
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildChromoly/hi-tensile steel · Shimano Altus/Tourney TY-22 · 26" wheels
Frameset
| Frame Construction | TIG-welded |
|---|---|
| Frame Material | Chromoly/hi-tensile steel |
| Fork | Khs |
| Fork Material | Chromoly, unicrown crown |
Drivetrain
| Component Group | Shimano Altus/Tourney TY-22 |
|---|---|
| Shifters | Shimano Altus EZ Fire Plus |
| Front Derailleur | Shimano Tourney TY-22 top-swing, bottom-pull/clamp-on 31.8 mm |
| Rear Derailleur | Shimano Altus |
| Crankset | Tracer, 22/32/42 teeth |
| Bottom Bracket | Victor VP BC-50, 118 mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 7-speed, 13 - 28 teeth |
| Chain | Shimano CN-UG50, 1/2 x 3/32" |
| Pedals | Resin |
Brakes
| Brakes | Shimano brakes, Shimano levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" steel |
|---|---|
| Handlebar | Steel |
| Stem | Steel |
| Saddle | Cruiser w/springs |
| Seatpost | Kalloy SP-242, 29.2 mm diameter |
Wheels & Tires
| Hubs | Front: aluminum quick release, Rear: aluminum nutted |
|---|---|
| Rims | Aluminum, 36-hole |
| Spokes | Steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 26 x 1.95" Duro Amber |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 552 mm |
| Head-tube angle | 71° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 429 mm |
| Wheelbase | 1052 mm |
| Fork offset / rake | 45 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
More parts (2)Fewer parts
29.2 mm diameter
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 1.95" Duro Amber
- Drivetrain
- 7-speed
- Seatpost diameter
- 29.2 mm
- Bottom bracket / shell
- Victor VP BC-50, 118 mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: TIG-welded · Fork: KHS · Chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Altus/Tourney TY-22 · Shifters: Shimano Altus EZ Fire Plus · Front derailleur: Shimano Tourney TY-22 top-swing, bottom-pull/clamp-on 31.8 mm · Rear derailleur: Shimano Altus · Crankset: Tracer, 22/32/42 teeth · Bottom bracket: Victor VP BC-50, 118 mm spindle · Rear cogs: 7-speed, 13 - 28 teeth · Chain: Shimano CN-UG50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano brakes, Shimano levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Aluminum, 36-hole · Hubs: Front: aluminum quick release, Rear: aluminum nutted · Front tire: 26 x 1.95" Duro Amber
Controls and contact points
Archived: Headset: 1 1/8" steel · Handlebar: Steel · Stem: Steel · Seatpost: Kalloy SP-242, 29.2 mm diameter · Saddle: Cruiser w/springs · Pedals: Resin
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.




