Uses front tire 26×1.95; rear size isn’t listed.
Velopedia Bicycle Archive
1996 KHS Alite 500
Original specifications: Shimano Alivio drivetrain · 26" wheels · 26.1 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #55074- Model year
- 1996
- Category
- Mountain
- Original MSRP
- $499.00
- Sizes
- 15", 17", 19", 21"
- Colors
- Polished, Red
- Weight
- 26.1 lb
- Geometry
- Legacy reference
- In this record
- 26 specifications · original MSRP · geometry
Model history 14 other years
Browse other years
Compare side by side
Identification clues
1996 archived details
- Published colors
- Polished, Red
- Frame
- Alcoa 7005 aluminum, double-butted
- Original equipment
- Shimano Alivio
Clues, not proof of model year. Colors vary and components may have been replaced.
Original buildAlcoa 7005 aluminum, double-butted · Shimano Alivio · 26" wheels
Frameset
| Frame Construction | Welded aluminum |
|---|---|
| Frame Material | Alcoa 7005 aluminum, double-butted |
| Fork | Spinner |
| Fork Material | Chromoly, unicrown crown |
Drivetrain
| Component Group | Shimano Alivio |
|---|---|
| Shifters | Shimano Altus EZ Fire |
| Front Derailleur | Shimano Alivio top-swing, top-pull |
| Rear Derailleur | Shimano Alivio |
| Crankset | SR CW-CH15, 22/32/44 teeth |
| Bottom Bracket | Tien Hsin TH-M1, 110 mm spindle |
| BB Shell Width | 68mm English |
| Rear Cogs | 7-speed, 13 - 28 teeth |
| Chain | Shimano CN-UG50, 1/2 x 3/32" |
| Pedals | Victor VP-893N |
Brakes
| Brakes | Shimano Altus brakes, Shimano Altus levers |
|---|
Cockpit & Contact Points
| Headset | 1 1/8" threadless Dia-Compe Kontak Aheadset ST-2 |
|---|---|
| Handlebar | Wei Hau ATB-1 |
| Handlebar Extensions | HL M-1 |
| Stem | Hsin Lung TDS-AL-C42-8 |
| Saddle | Velo VL-195 |
| Seatpost | Kalloy SP-242, 27.6 mm diameter |
Wheels & Tires
| Rims | Weinmann 519, 32-hole |
|---|---|
| Spokes | Stainless steel, 2.0mm straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 26 x 1.95" Cheng Shin C-1027 |
| Wheel Size | 26" wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 565 mm |
| Head-tube angle | 72° |
| Seat-tube angle | 73° |
| Chainstay / rear center | 425 mm |
| Wheelbase | 1048 mm |
| Fork offset / rake | 40 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
top-pull
More parts (3)Fewer parts
27.6 mm diameter
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 26 x 1.95" Cheng Shin C-1027
- Drivetrain
- 7-speed
- Seatpost diameter
- 27.6 mm
- Bottom bracket / shell
- Tien Hsin TH-M1, 110 mm spindle · 68mm English
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: Welded aluminum · Fork: Spinner · Chromoly, unicrown crown
Drivetrain
Check drivetrain wear →Archived: Group: Shimano Alivio · Shifters: Shimano Altus EZ Fire · Front derailleur: Shimano Alivio top-swing, top-pull · Rear derailleur: Shimano Alivio · Crankset: SR CW-CH15, 22/32/44 teeth · Bottom bracket: Tien Hsin TH-M1, 110 mm spindle · Rear cogs: 7-speed, 13 - 28 teeth · Chain: Shimano CN-UG50, 1/2 x 3/32"
Brakes
Inspect the brakes →Archived: Brakes: Shimano Altus brakes, Shimano Altus levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 26" wheels · Rims: Weinmann 519, 32-hole · Front tire: 26 x 1.95" Cheng Shin C-1027
Controls and contact points
Archived: Headset: 1 1/8" threadless Dia-Compe Kontak Aheadset ST-2 · Handlebar: Wei Hau ATB-1 · Stem: Hsin Lung TDS-AL-C42-8 · Seatpost: Kalloy SP-242, 27.6 mm diameter · Saddle: Velo VL-195 · Pedals: Victor VP-893N
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.
