Lowest1.83:1
Highest4.08:1
Total range223%
Estimated speed At 90 RPM
Lowest gear
Highest gear
Uses front tire 700C×25; rear size isn’t listed.
Velopedia Bicycle Archive
1993 Kestrel 200SCi/600 Ultegra (01)
Original specifications: Shimano 600 Ultegra drivetrain · 700c wheels · 20.5 lb published weight.
Planning to sell? Draft your listing
No archive photo is available for this record.
At a glance
Archive #44162- Model year
- 1993
- Category
- Road
- Original MSRP
- $1,799.00
- Sizes
- 51, 54, 56, 58, 61
- Weight
- 20.5 lb
- Geometry
- Legacy reference
- In this record
- 20 specifications · original MSRP · geometry
Original buildKestrel 200SCi carbon fiber · Shimano 600 Ultegra · 700c wheels
Frameset
| Frame Construction | One-piece carbon fiber |
|---|---|
| Frame Material | Kestrel 200SCi carbon fiber |
| Fork | EMS composite |
Drivetrain
| Component Group | Shimano 600 Ultegra |
|---|---|
| Shifters | Shimano 600 Ultegra downtube |
| Front Derailleur | Shimano 600 Ultegra |
| Rear Derailleur | Shimano 600 Ultegra |
| Crankset | Shimano 600 Ultegra, 42/53 teeth |
| Rear Cogs | 8-speed, 13 - 23 teeth |
| Chain | Shimano CN-HG90 |
| Pedals | Shimano 600 Ultegra clipless |
Brakes
| Brakes | Shimano 600 Ultegra brakes, levers |
|---|
Cockpit & Contact Points
| Handlebar | SR Anatomic Criterium |
|---|---|
| Stem | Nitto Technomic |
| Saddle | Selle San Marco Rolls |
| Seatpost | Shimano 600 Ultegra |
Wheels & Tires
| Hubs | Shimano 600 Ultegra |
|---|---|
| Rims | Araya VX-400, 32-hole |
| Front Tire | 700 x 25c Avocet FasGrip |
| Wheel Size | 700c wheels |
No specifications match. Try a component name or clear your search.
Geometry
Historical measurements. Frame size unknown.
Reference drawing
Size
Measurement
Measurement
—
Select an available measurement to locate it on the frame.
All geometry measurementsLegacy reference · 6 measurements
| Measurement | Legacy reference |
|---|---|
| Top tube | 559 mm |
| Head-tube angle | 74° |
| Seat-tube angle | 74° |
| Chainstay / rear center | 410 mm |
| Wheelbase | 990 mm |
| Fork offset / rake | 45 mm |
Frame size not recorded.
Gearing
Lower gears help on climbs. Higher gears suit higher speeds.
RPM
RPM = pedal turns per minute.
How it works
Ratio = front teeth ÷ rear teeth. Hub gears also include the hub’s internal ratio. A 400% range means the highest ratio is four times the lowest.
Speeds are estimates from tire size and pedal cadence. Actual speeds vary.
Try your current gearingChanged tires or gears? Calculate your setup.
Your changes apply to this calculation. The archived build stays unchanged.
Gearing results
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
Find replacement parts
Shimano CN-HG90
Retailer offers
SRAM PC-830 Chain One Color, 8 Speed
Replacement option
Shimano CN-HG90 on eBaySponsored links
700 x 25c Avocet FasGrip
Replacement search: 700cx25 bicycle tire Before ordering: Check rim type and tire clearance.
Shimano 600 Ultegra clipless
More parts (7)Fewer parts
Shimano 600 Ultegra
42/53 teeth
Shimano 600 Ultegra
Shimano 600 Ultegra
Shimano 600 Ultegra downtube
Nitto Technomic
Shimano 600 Ultegra
Shimano 600 Ultegra
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Parts and service referenceQuick reference before buying parts
Archived specifications for reference. Check the fitted parts before ordering.
- Front tire
- 700 x 25c Avocet FasGrip
- Drivetrain
- 8-speed
Equipment inspection checks 10 checks based on 5 archived component groups Open equipment checksClose equipment checks
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Frame and fork
Inspect the frame and fork →Archived: Frame: One-piece carbon fiber · Fork: EMS composite
Drivetrain
Check drivetrain wear →Archived: Group: Shimano 600 Ultegra · Shifters: Shimano 600 Ultegra downtube · Front derailleur: Shimano 600 Ultegra · Rear derailleur: Shimano 600 Ultegra · Crankset: Shimano 600 Ultegra, 42/53 teeth · Rear cogs: 8-speed, 13 - 23 teeth · Chain: Shimano CN-HG90
Brakes
Inspect the brakes →Archived: Brakes: Shimano 600 Ultegra brakes, levers
Wheels and tires
Check wheels and tires →Archived: Wheel size: 700c wheels · Rims: Araya VX-400, 32-hole · Hubs: Shimano 600 Ultegra · Front tire: 700 x 25c Avocet FasGrip
Controls and contact points
Archived: Handlebar: SR Anatomic Criterium · Stem: Nitto Technomic · Seatpost: Shimano 600 Ultegra · Saddle: Selle San Marco Rolls · Pedals: Shimano 600 Ultegra clipless
Have you owned this model?Help preserve its real-world history by sharing your owner experience.
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
Already contributed? Send me a fresh private edit link
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
Checking current listings…
Find this bike on eBay
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.