
Race Face Ride XC Seatpost Black, 27.2x375mm
Replacement option
Velopedia Bicycle Archive
Original specifications: 20" wheels · legacy reference geometry.
Planning to sell? Draft your listing
At a glance
Archive #91262Browse other years
Compare side by side
2002 archived details
Clues, not proof of model year. Colors vary and components may have been replaced.
| Frame Construction | Bonded |
|---|---|
| Frame Material | 7005 aluminum |
| Fork | K2 |
| Fork Material | Chromoly, gusseted crown crown |
| Rear Derailleur | Other |
|---|---|
| Crankset | K2 Tubular Chromoly 3-piece, 44 teeth |
| Bottom Bracket | Three piece |
| Rear Cogs | 1-speed, 16 teeth |
| Chain | KMC Z-610HX, 1/2 X 1/8" |
| Pedals | K2 Alloy, chromoly axle |
| Brakes | Tektro 921 linear pull rear brakes, Tektro 311A rear levers |
|---|
| Headset | 1" Cane Creek SX-1 |
|---|---|
| Handlebar | K2 Cruiser/Standard Moto |
| Handlebar Extensions | Not included |
| Stem | K2 Race Forged |
| Saddle | K2 Maintime Race |
| Seatpost | Aluminum micro-adjust, 27.2mm diameter |
| Hubs | K2 Ben Hur |
|---|---|
| Rims | Sun Rims Rhyno Lite, 36-hole |
| Spokes | Stainless steel, 14ga. (2.0mm) straight gauge |
| Spoke Nipples | Brass nipples |
| Front Tire | 20 x 2.125" Tioga Comp III |
| Rear Tire | 20 x 1.75" Tioga Comp III |
| Wheel Size | 20" wheels |
No specifications match. Try a component name or clear your search.
Historical measurements. Frame size unknown.
Reference drawing
Select an available measurement to locate it on the frame.
| Measurement | Legacy reference |
|---|---|
| Top tube | 548.6 mm |
| Head-tube angle | 73° |
| Seat-tube angle | 70.5° |
| Chainstay / rear center | 408.9 mm |
Frame size not recorded.
Original gearing is incomplete. Enter your setup to calculate ratios and cadence speeds.
Your changes apply to this calculation. The archived build stays unchanged.
| Measure | Original | Your setup |
|---|---|---|
| Lowest ratio | — | — |
| Highest ratio | — | — |
| Total range | — | — |
| Lowest-gear speed | — | — |
| Highest-gear speed | — | — |
Speeds are estimates. These calculations do not establish component compatibility or available tire clearance.
Parts & serviceability
27.2mm diameter

Replacement option
Tektro 311A rear levers
Based on the original build. Check fit and installed parts before ordering. Affiliate links may earn Velopedia a commission. As an Amazon Associate I earn from qualifying purchases.
Archived specifications for reference. Check the fitted parts before ordering.
Checks selected from the archived equipment. Confirm what is fitted today. This is not a complete safety inspection; use the full inspection guide before test riding.
Full used-bike inspection guide →
Archived: Frame: Bonded · Fork: K2 · Chromoly, gusseted crown crown
Archived: Rear derailleur: Other · Crankset: K2 Tubular Chromoly 3-piece, 44 teeth · Bottom bracket: Three piece · Rear cogs: 1-speed, 16 teeth · Chain: KMC Z-610HX, 1/2 x 1/8"
Archived: Brakes: Tektro 921 linear pull rear brakes, Tektro 311A rear levers
Archived: Wheel size: 20" wheels · Rims: Sun Rims Rhyno Lite, 36-hole · Hubs: K2 Ben Hur · Front tire: Front: 20 x 2.125" Tioga Comp III, Rear: 20 x 1.75" Tioga Comp III
Archived: Headset: 1" Cane Creek SX-1 · Handlebar: K2 Cruiser/Standard Moto · Stem: K2 Race Forged · Seatpost: Aluminum micro-adjust, 27.2mm diameter · Saddle: K2 Maintime Race · Pedals: K2 Alloy, chromoly axle
Share the details that would help another rider understand how this model fits, rides and holds up over time. Velopedia reviews every contribution before publication.
For privacy, Velopedia shows the same confirmation whether or not an experience exists.
No recent price sample is available for this bike. Check eBay for matching listings.
Search eBay US; check the model year, size and installed components. We may earn a commission from purchases.
Specifications are presented as a reference. Components may vary by market, size, production run, or later manufacturer revisions.